Contact Us
| I was pleasantly surprised when this cover came. It has a little piece of two sided emblem tape that is pressed on the inside of the cover and you just need a pair of tweezers to pull the protective layer off before sticking it on. I even like the fact that it has enough height on the cover that the cover comes all the way down to the base of the handlebar switch cluster so it doesn't look like it's pressed on it looks like it's the original factory thing, except quality chrome.! I was pleasantly surprised to see that it was made of metal and not plastic! And it looks absolutely gorgeous. The switch has two stamped little nubs that point to the run position and the off position. For the "run" indicator position, I took a toothpick with a little bit of red paint and just put a little dot of paint over that nub and it acts like a nice little pointer. |
| Much needed..much better replacements. Do a great job of making the panels feel securely on! Customers, please do yourself a favor and check those old grommets on your bike for dry rot. It just takes one instant for wind to yank a panel off and lost forever! I expected a couple were, but all were dry rotted. I wish the piece count of the kit were more. For price of shipping, I could have used some spares! |
| I just purchase a 2023 Goldwing and it just didn’t seem right that the top case and side bags weren’t lined with any mats, so I purchased these three piece fitted carpet mats and what a difference. Just adds that touch needed for a clean look. |
| I just ordered and received the Dunlop Elite 4 combo set for my 2018 GoldWing. They arrived in a couple of days and in a box!!! Nice! After opening and verifying the correct tires, I resealed the box and stored them until it is time to put them on the bike (they are often unavailable for months at a time). I have Elite 4 tires on my bike now, and the tire wear is exceptional. Based on my last tread depth measurements and extrapolating out, I expect to get over 20k miles out of the front and 30k or so from the rear. The tires ride very smooth and grip quite well. I am very pleased with their performance. |
| Would be great if there was an option armrests could stay in fixed position and doesn't move back and forward while driving and nobody is in passenger seat. Otherwise quality and easy install staff👍 |
| Fits great with armrests. nice and easy install. |
| Great tires, best cruiser tires out there. They look great on my 1500 Goldwing, hoping to get 20,000 miles out of them which for me is just over a year. |
| OEM pads fit perfectly! Wingstuff delivered on time . Would order again definitely. |
| So whats good about this is its the complete kits in other words safes few dollars , Make sure your tubes are clean so not nick new seals Safe money Good time change or redo your head bolts too |
| Nice product, does exactly what the name implies. Installation was not too difficult, I did it as part of the trunk harness / trunk rack / trunk rack light install. Fits perfectly. |
| These grab rails make it much easier to pull the bike up onto the center stand. Installation was easy. Have the left side grab rail within reach when you remove the original. Pull the spring on the helmet lock cable all the way back to make it easier to slip it off the original. Hold onto that spring, while you pick up the new grab rail and slip the cable into it. |
| I previously bought some cheap highway pegs made in China, which broke the very first time I put any weight on the peg. So I got these, and they are great! Everything is very solid, and they are well designed and fit my 2010 GL1800 perfectly. I had little trouble installing, as the instructions are good. The most difficult step was inserting the roll pins, but I have a bench vice (plus pliers and a hammer), so it wasn't too bad. I would recommend these to any GL1800 1st Gen owner. |