

|
I recently passed 180,000 km (about 110,000 miles) so like others have said - lots of tires. I generally change both tires at the same time - just like the newly broken in tire feel. These Elite 4's have about 15,000 kms (just under 10,000 miles) on them and they still look great and ride nice. I over inflate them a bit and there's been no cupping - the centre core is as advertised - longer wear, so I'm hoping to get my best mileage yet... I also have the Centramatic wheel balances and have no issues with balancing. Another plus is the tires hold pressure good - I check prior to every ride (only takes a minute - so I'm on top of that)) - I love these tires. |
| Love these lights. Kit came short one of the mounting bolts for the left side light. Called Show Chrome and they are sending me out one. Good customer service. Will post pics once completed. |
| Love this new black luggage rack, it goes so good with our new bike. Very good quality had a chrome one like it for about 6 years, still looked great but we sold that bike , we travel a lot so had to get a new one. The other one done so well , we had to get another one. Again thanks for always for fast shipping and great service |
| Best sound ever on a Goldwing. Got it for my husband for his birthday,but he couldn't wait till then. We got out there and had it on in less than an hour. He loves it. LOL HE SAYS HE WENT FROM A PRIUS TO A PORSCHE. You all are the best always fast to ship everything. Thanks again for a great job |
| Lenses were really easy to install. Just be sure to press the pre-installed foam trim down around the entire circumference. The sense will slide back into mirror housing easier. |
| Just as good today for quality and value as when I installed my first set back in 2008. |
| I had a set for the old 2008 that was OK to install. After I totaled that one I bought a used 2008 level 3 without the wings. This set of instructions took the frustration away when drilling the mount holes through the trim pieces. Last time I had to remove trim to drill. Not this time, just tape the template as directed, mark the centerline and drill. Spot on per the instructions. As always a quality product made in the USA. |
| I'm not as young as I think and was totally against this idea at first. but after ten hours in the saddle this was one of the best buy I've made in years. The only down side would be putting a knife to my bikes seat ,hoping not to hit the heating cords ,just hate to cut a perfectly good seat. I have gotten a friend to add this to his bike. |
|
After seeing these antenna mounted flag poles on another Goldwing, I purchased one to replace my old flag pole that was mounted on the trunk rack. I decided to mount the new flag pole on the right (AM/FM) radio antenna, since I was uncertain what effect the antenna would have on the SWR (Standing Wave Ratio) tuning of the (left) CB antenna. The mounting system is not intuitive however. It basically is held in place by friction on the shaft of the radio antenna. While it really can not fall off, it would be possible for the flag pole mount to vibrate loose. However, in the 2 months since it was mounted, the flag pole has remained solidly attached after hundreds of miles of riding. As far as for flag wear, I expect to replace the flag on an annual basis, just like I've done with the previous trunk rack mounted flag pole. I have noticed that, depending on the wind/travel direction, the flag will usually fly straight back but does occasionally wrap around the whip radio antenna. In summary, flag pole/flag looks good while parked or going down the road. Expect normal wear/tear on the flag and carefully read the directions twice before you try to mount the pole. It's not hard, just not obvious how it mounts. |
| Exactly as described and arrived on time in great shape. Easy to install and looks great. Truly "safety Chrome" |
| I have one of these LED battery gauges on my last three bikes and have never had one fail. On my 2008 Goldwing, I mounted the black version just below the left corner of the right front speaker - basically, opposite of where the lever for the foot warmers is located on the left side. In that position, I can see the gauge by glancing forward and down when riding. A small hole was drilled for the power wire, which I ran across to the wiring for the 12 volt connector in the left fairing pocket. Easy modification to do. |
|
I have been looking for riding pegs for a long time because I don't really like how the other brands look dangling from the side of the bike. They collect bugs and require more washing and polishing. Well these work really well for me and theres not much hanging out to clean. The skinny, They install easy. The off set from side to side doesn't matter to me because if i wasn't told about it, I probably would even know. I flip them out when i use them and kick them in when done. For me, this is a great product. |