Contact Us
| Lots of disassembly and holes to drill in the trunk, take your time. The hole positions are pre-marked but there are several to choose from. If you are thinking about the trunk light installing it at the same time will save work. |
| Backrest works good and looks great. Easy to do a professional looking install due to the seat being already set up to accept the backrest. The backrest does fold down a couple of inches for passenger egress if you pull it forward from the bottom. |
| Easy to install and provides organized storage for small items. |
| I bought this to go under my jacket during the transitional months here in Florida where it's cold in the early morning then cold again in the late evenings. the Fleece lining is especially comfy and it has plenty of pockets.I wish it had some illumination when wearing as an outer coat. |
| This is the easiest upgrade you can make to your Gold Wing. This accessory is NOT year specific and is a can't miss/can't mess up install. Fits around your typical 1-7/8-inch ball and covers it for a clean look. This item is made of a chrome plastic. An included Foam insert is installed around the neck of the hitch ball and this chrome cover is squeezed on over it. That's it! Beauty and clean looks in 5-seconds. |
| The Rivco hitch platform is a perfect addition for a solo ride during the hot summer months to carry water and snacks or for riding 2-up and carrying cargo for the trip. You can use any bag to strap on and take with you, but if you’re concerned about security consider the Rivco bag. It has a built in security system that makes it easy to secure on the rack. |
| After installing 3 of these on Gen I models, I finally got around to installing the Rivco Hitch Kit on my 2012 Wing. The installation was nearly identical with the exception that the fender well space on the Gen II seems much tighter for the placement of the upper arm mounts than on the Gen I models. However, the fit and finish are the same. It looks great and it is rock solid. I installed the bag platform mount in addition to the hitch ball. Installation took up to 3 hours with most of the time and effort going towards the upper mounts and wire relocation. The instructions are non specific to model year and the pictures included are of Gen I. That’s the reason for only 4-stars. |
| First set installed and lasted 13 months then second set just on 12 months. Bike only travelled 40,000kms. Now have 3 rd set fitted with fingers crossed. Thanks to Wingstuff for supporting the new purchase and providing excellent customer service even from this side of the world. NZ Hopefully product reliability in the future. They look great when they are all working. |
| When installing run your wires to each area of the bike (front, side, rear, driving) when lighted that section will be on not lights not on simple. Tip: the green and the spade are the switched line, and wiring is attached to the spade near the green |
| Installed these lights in my low beams on my 2015 (40th Anniversary) Wing. What a difference. Will change out the High beams shortly. The LED Low Beams make the High beams look yellow due to the difference in light frequency. If you are looking to make the jump, these are a great choice. |
|
I purchased 6 of these to convert all rear bulbs on my 2015 GW to running and brake lights. First observation: They did not "Click" into the OEM socket as solid als the OEM incandescent bulbs. They fit but not as well as they should. Second observation: They provided great, strong light. But on one of the bulbs the center inside the cage was rotated about 20 degrees, so when observed from the outside it looked crooked in the lamp. Could not be fixed since the socket provides a predetermined position when locked in correctly. When removing the lamp one little contact came out of the bulb socket and made the bulb useless. When checking the other bulbs they worked alright but all were lose in the socket. Which esentially means they could either flicker on the road or fail completely. So I went and bought a Sylvania 7443 just to find out it was just as lose in the socket. Junk as well. As a last resort I bought a Philips 7443 Vision 12yr warranty ( They come in a two pack for $29 on the Internet). These locked into the socket with a solid click and some serious pressure. They will never come out. And are guaranteed form12 years. The pathfinders have NO warranty. So buyer beware. |
| Junk! Much static. Cuts in and out with mostly one side making contact. Just received the one I bought from another vendor and it's perfect. Price 11.99 on e-bay. |