Contact Us
| I use this product on my Shoei helmet visor and on my 2018 GW Instrumentation panel. This product brings out the clarity and clears out the fine scratches on the soft plastic that Honda uses on their instrumentation panel. When I had the stock Honda windscreen I used it on cleaning the windscreen because Honda uses a soft plastic that scratches very easily. Good Product! |
|
I can honestly say with no reservation that Fred’s instructional video series on the 2018+ Goldwing has been invaluable resource for me as I explore the maintenance and servicing of my new bike. Understand that this is not a cleanly produced series, but rather a “hands-on “set which is intended to inform the user about all the facets of performing your own maintenance on the bike. Fred’s presentation is clear and thorough. There are 40+ topics covered and more added as he goes through his bike. The videos paid for themselves in the first two minutes when I understood how some of the fasteners and clips work on the bike. The fact that the video series is available for streaming and are also downloadable makes them a wonderful resource which II will carry with me when I ride. Good job Fred! |
|
These are high quality items that fit in exactly the same way as the OEM arm rest extensions which I already had, so could use the same bolts. Very pleased with the look and function of them and the added security that they give my Mrs. Shipped to England, received in 1 week. Great job ! |
| These lights provide much improved flood lighting for the rider at night and excellent lighting for oncoming traffic to see you in daylight. Electrical connections could be better quality, however I sealed each with heat shrink tape and installed all wiring inside 1/4†wire loom for additional protection. The double stick tape for the on off switch is cheap. One of the LED lamps was defective out of the box. I called Rivco and they wanted to test the defective lamp at their facility before sending a replacement. That idea sucks! I wanted a replacement lamp sent out and would gladly return the defect with their return label. I called Wingstuff and spoke to Mark. He called me back an hour later and said Rivco told him they would send a replacement as soon as I cut the cable off the lamp to show it was destroyed and email a photo. Thanks Mark!! Install takes about an hour. I would recommend that you test each lamp prior to installation and complete the mechanical adjustments, including installing the cowl covers before making final electrical connections. The replacement lamp sent out had the attaching bracket between the heat sink and lamp body installed backwards, causing the lamp to stick out 3/8†outside the cover. Once I turned it around it fit perfectly inside the cover. The lens covers are thin, so we’ll see how well they hold up. |
|
After riding from CA to NC and suffering from sore-as-hell knees, I knew I'd have to find a highway peg solution that lets me stretch out my legs. I'm 5'10" with a 32" inseam, fyi. My 2010 is very clean and uncluttered, so since I also didn't want a bunch of hardware hanging off the engine guards the Aero pegs got my attention right away. I ruled out the chrome finish because I'm not a big chrome guy and they were $100 more -- which BTW, I get; chrome adds a whole dimension of production yield and scrap cost. I was tempted by the black but some of the reviews said they turn purple after a while, and that would make me nuts. So I went with the anodized silver. For $300, these are a terrific value. They're made of substantial hunks of machined aluminum and the fit and finish are flawless. Even the feel of the swing out pegs is excellent, so the mating surfaces must be carefully monitored. The installation took me 15 minutes. The instructions are totally clear. The only thing I did wrong was that I was in a hurry to remove the stock trim and I bent one of them far enough to crack the chrome plating slightly. Damn. I learned on the other side. Apparently, Aero has made a couple of welcome improvements to the product: (1) they've cut a breakaway notch on the bottom of the pegs so if you do drop the bike, they'll snap off before damaging the valve covers, and (2) they are not offset anymore. At least not as far as I can tell -- my legs are evenly stretched out. I mounted the pegs in the front-most position. This allows me to completely straighten my legs -- the whole reason I bought these things. I'm certain this is going to make a huge difference over the long haul -- I'm doing a 4 hour ride this week and then I'll know for sure. If anything comes up, I'll return to this review and update it. So to summarize: they're perfectly integrated appearance-wise, the quality and engineering is obvious, and they've solved my comfort issue completely. I'm very satisfied overall. Great purchase. |
|
Agree with other reviewer. This antenna is a PoS This Add-On antenna wobbles and cannot be adjusted to be firm. Poor design. Lock pin does nothing. 2nd attempt with manufacturer. Im done. Spend extra money and get factory unit. |
| I have these on my 06 Wing for years love them so I bought a set of Trunk ones for my newly acquired 2005 Trike... wires are not long enough to reach up under the seat, I had to tap into rear taillights to hook them up, don't know if they make a longer wire for Trikes that's why 4 stars |
| Grips look great as long as you have the patience of a saint when installing them. Only broke one screw head off so feel lucky. These could be much better for the money. I like them even tho slightly larger than their standard grips. Do like the throttle boss |
|
I had these vertical rear lights installed on my 2016 Goldwing and I gotten more complements on how much the back of my Goldwing is lite up. I would highly recommend these lights, you can never have enough lights |
| Received as a Christmas gift. Snow is slowly going away-time to install, but where? There is not enough room where the stock horn is located. A little bit of thinking, came up with a solution. There is a tab on the engine guard which is perfect for mounting this horn. Looks good, sounds better. If I was a machinist, I could make mounts look OE. I am simply a DIY'r with spare stuff laying around the garage and a few more weeks before the season starts. |
| Had been waiting for these fitting is SO simple took less than 5mins and work just as well as the old footwings on my 2012 very very good :) :) :) |
| Fitted them today so simple to fit don't even have to use the template cuts all the wind you want and then some GREAT product :) :) :) |