

| Took a little longer than usual on the shipping but no real problem as the snow prevents toodling bout on the bike. Made a call to Wingstuff and learned that manufacturer was waiting on the tinting ingredient.Consulted manual and removed the old windshield being careful to stuff the rabbit holes in case I dropped a nut or bolt. Once the existing windshield was removed I opened the package with my new F4+2 with vent hole. Shipping box was pretty beat up but the windshield was intact and no scratches.Got out the instructions read up to Step 11 "REMOVE the tape that the old windshield used to slide on. This was the tedious portion of the install as the old tape wanted to split apart and leave the adhesive part, took my time and peeled all ten verticals and the large horizontal and replaced with the soft velcro strips that were a tad short on the verticals and a little long on the horizontal but not a problem once I visualized the mechanics of the raising and lowering.The vent fits perfectly and the windshield mated up to the bike quite effortlessly as if the old windscreen was going back on.The new windshield at the lowest level is the same height as the old one fully extended this means I can see over at lowest setting have room to go a little higher as I have wanted to on occasion. The vent on the lowest position does not hang over the console and is more back into the dash which will help somewhat at keeping the rain from dripping down onto knobs and such. It is a little wider than the stock windshield so I suppose that's a plus on the colder days but a negative for the hotter ones.The tinting is not that dark and look forward to the effect it will have on headlights, I look over so no biggie and I can duck down for oncoming headlights.Looks nice really dresses up the Pearl White on my 2012 |
| Lights are very good, really adds some light up front. A bit of a pain to install as to do it right you really need to remove the top shelter to gain access to run the wires. Don't even think about fishing them! Too many things to get hooked on. |
| Nice product, lights are bright, only problem is wiring is too short to run to adapter per instructions. However, if you run straight up the back of the saddlebag you'll find that works well with some slack left in the wire. |
| I was skeptical when I first read the reviews about these, but I thought it was worth a try. Turns out it was a good call. I'm 6'1" 240Lbs and wanted more comfort from my 2018 Gold wing tour. Moving the handlebars back proved to be the perfect move for me. Long distance rides often left me tired, but with this change I can sit back in the saddle and relax. the bars make my longer rides more relaxing. Arms are in a better riding position and elbows bent slightly for comfort. I recommend these to anyone looking for improvements to the new tour. There is a bonus with these adapter: when the mirrors are folded, the bars are now set back and do not bang into the mirrors as they did before the mod. The video was very helpful, although the cable and hose routing need to be better described or photographed.I would like to see a better template for trimming the plastic cover. This template leave a noticeable gap even when trimmed precisely as shown. |
| They fit and work, what else can I say about them. |
| Just installed these on my 2006 Gold Wing. Perfect fit, nothing to modify.I think they sound better that the originals, at least in the garage as it's winter outside with temp of9°F it will be several months before I listen to them while riding |
| Just installed in my 2006 Gold Wing. I have K&N Filters in my other bikes all fit Perfectly except this one. This one seemed just a little to long front to back but I got it to work.It will be several months before I'll ride the bike as it's winter outside with temp at 9°F. |
| As much as this was a pain in the butt to install it is well worth going with the OEM filter after 2 1/2 hours labor I really wanted to write pot in there. Perfect fit no complaints whatsoever |
| Easy install. Very effective at reducing wind/rain on feet and lower legs. Reduced air drag on legs reduces fatigue on longer rides. |
| delivery was fast. product looks terrific. |
| delivery was prompt. they look excellent. i am excited to install them this spring. |
| I have two of them, one at home and one at the office. I do not have to worry about my helmet accidentally being knocked off my desk or cabinet. The holder is secure and keeps my helmet out of the way. |