Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

Go Back

Mill Creek, WA

Mill Creek, WA, US,

Alias:

Mill Creek, WA

About:

- Nothing entered yet -

Occupation:

- Nothing entered yet -

Favorite Quote:

- Nothing entered yet -

Member Since:

11.06.2008


Bike 1:

Red 2008 Honda Wing w/air bag

Bike 2:

- No Bike 2 -

Bike 3:

- No Bike 3 -


Photo Gallery



Recent News Comments


Mill Creek, WA has not yet written any comments.


Latest product reviews View All

Centramatic Stainless Wheel Balancers for GL1800
ITEM CODE: CTMGW100-102,   SKU: CTMGW100-102

05.18.2010
Between these and the Superbrace fork brace the ride is best described as solid as a rock and smooth as silk at the same time. Front fork deceleration wobble is gone and cornering, even at lower speeds, is like being on a rail. I added the brace a few hundrer miles ago and it helped with the wobble, but with this it is gone completely and there is a difficult to describe difference in the ride. It was also and easy DIY install, without even the need to pull the front tire completely "out" of the forks/calipers (which would mean a lot more disassemble), just pull the axel and pinch bolts and rotate the tire as you go to get at everything. Rear also went on without pulling the tire out from under the bike.
Was this helpful?

ITEM: RIGL1800722

05.18.2010
Very solid installation and incredibly light weight. Be aware there is a protrusion on the back side of the fender that is right above the amplifier box where you install the isolator on newer models. If you don't get the isolater down in the box far enough this will interfer with the wiring, and the best I could do was get the isolator even with the top of the box, horizontally. There is very little room in the box and the isolator is actaully against the amp. The spring clip system to hold the reflector and cover the hole when the hitch is not in is poor, it wants to slide down over time and expose the top of the hole you have to cut in the fender, but a larger diameter washer fixes that by stoping it from being able to move downward.
Was this helpful?

Trunk Light Reconfiguration Harness for GL1800
ITEM CODE: EC02112,   SKU: EC02112

05.18.2010
Oh, and it even comes with an extra wire in the part of the harness that installs inside the light housing allowing for easy conversion back to OEM operation if you get hassled about having one red and one yellow turn signal on the back, simple as unscrew the three acorn nuts inside the trunk, slide the light fixture out and unplug/replug one wire and reinstall. Alternatively, I suppose you could also simply change the yellow bulb in the saddle bags to a red bulb.
Was this helpful?

Trunk Light Reconfiguration Harness for GL1800
ITEM CODE: EC02112,   SKU: EC02112

05.18.2010
Great add on to increase visability in general but especially when pulling a trailer. Between this, and the plug to convert the spoiler to running/brake light, and the trunk and saddle bag lights wires, and the Rivco hitch wires the wire storage area under the trunk gets quite full, but if you are careful and zip tie things together to keep them organized it will all fit.
Was this helpful?

Chrome Lower Front Cowl for GL1800
ITEM CODE: BB52608,   SKU: BB52608

05.18.2010
Timing chain number in review below should be 3909.
Was this helpful?

Chrome Timing Cover for GL1800 Goldwing
ITEM CODE: KU3909,   SKU: KU3909

05.18.2010
Added lower cowl (AO451203) timing chain (KU3909) intake and radiator accents (KU3990 and AO451629NUB), WOW! Really finishes everything off nice. My buddy says it doesn’t even look like the same bike. I wish the radiator accents replaced OEM parts instead of taping/silicon sticking over the existing parts, but they have been on a while now and through a washing and seem to be holding fine. Just be aware if you are going to add a bra that you will want to do something about attaching the radiator anchor straps. The straps are supposed to hook to the grill, which might be fine on the OEM grill, but it will pull the chrome grill accent part of AO451629NUB out if you hook it there.
Was this helpful?

Chrome Lower Front Cowl for GL1800
ITEM CODE: BB52608,   SKU: BB52608

05.18.2010
Added lower cowl (AO451203) timing chain (KU3929) intake and radiator accents (KU3990 and AO451629NUB), WOW! Really finishes everything off nice. My buddy says it doesn’t even look like the same bike. I wish the radiator accents replaced OEM parts instead of taping/silicon sticking over the existing parts, but they have been on a while now and through a washing and seem to be holding fine. Just be aware if you are going to add a bra that you will want to do something about attaching the radiator anchor straps. The straps are supposed to hook to the grill, which might be fine on the OEM grill, but it will pull the chrome grill accent part of AO451629NUB out if you hook it there.
Was this helpful?

Fleece Lined Water Repellent Helmet Bag
ITEM CODE: WSHBAG,   SKU: WSHBAG

04.25.2010
Bought 2, good bag for the price. Not a big deal but ours came with a thinner black liner than the fluffy whote fleece shown. Will still protect fine. It popped up on one of the best buy ads and I should have looked further because for a few bucks more you can get one with an outside pocket that would have been better for storing the intercom cord than stuffing it inside the helmet where it might scratch the visor.
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

04.25.2010
Very straight forward installation, well engineered, high quality. I am 6' with a 32" inseam and so far the stock 6" lenght seems OK to me. If the bars were much shorter and I think my legs would rub the fairing sides and be quite uncomfortable. The directions were not clear on where the wave, flat and lock washers go, and their reference to the parts are not standard/clear but it can be figured out pretty easily. I put the flat and lock on the forward mount as it seemed it would take the most torque/vibration, and used the wave on the peg mount. Final adjustment goes much easier with a buddy to keep playing with the three different adjustments until you find the right combination for your own preference. In the end, they tuck well out of the way and complement existing lines when not in use, flip out easily when under way, and are rock solid with supports that utilize the bottom of the valve covers so you can probably stand on them with out having to worry about them working loose and rotating down on you.
Was this helpful?

Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201,   SKU: KU3201

04.08.2010
Install was straight forward, look good and obvious increase to visability/safety, would be five star except for fit of the screw holes. I tried a dry run of putting the screws in before installing to check the fit after all the warnings, and no matter how careful/slow I went cracking started with the screw only 1/2 way in. Easy fix was to take the next size up drill bit from what already slide in easy and enlarge the hole. I may have striped one or two, but at least they will fall out inside and can go back in with a little lock tight, but there was no way mine were going in without cracking badly before drilling out the hole. Possible might have helped if it were warmer.
Was this helpful?

Wish Lists


VIEW
VIEW