Contact Us
-
Performance Black Stainless Vented Belly Pan for GL1800
By WingStuff SKU: WS187416BK
-
$99.99Save $29.96
MSRP: $129.95
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
33 Member Reviews
1 Star: 0
2 Stars: 1
3 Stars: 2
4 Stars: 3
5 Stars: 27
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
Wayne
| 1st purchase made from wingstuff. Very nice product. Easy to install. Like the way it looks on the bike. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
Nice belly pan.
| Overall very nice. Not that hard to install, but kind of a pain in the butt. Should do the job. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
Luis
| Every time I got a new bike, I always bought it so it will protect the bottom of the bike. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
07.11.2019
SIMPLE, WELL MADE.
|
Easy to install, for a cleaner and safer ride. No chance of a coolant tank puncture. Takes 10 minutes to install... |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
12.08.2018
Belly Pan
|
This is a good belly pan.....had it on my 2010 & 2014...Definitely recommend it...really protects the bottom of the bike Wing Stuff...We need one for the 2018...when?? |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
09.26.2018
Excellent
|
I know this installation can seem very tough. I tried once and gave up on it, the side cover won't budge and the only solution I thought of was cutting V groves. Today I gave it a second try, took out the two bolts on the side and the front cowl screw also, pulled the side cover out with a constant pressure and a few firm jerks, it slid of the bolts enough for me to slide the cover over the bolts. Did the same thing on the other side. The trick is to pull the cover out giving constant jerks while pulling with firm pressure. Very good product. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
11.26.2017
Hassle to Install
| Look for pans that have slots in the mounting holes. You have to unpost the 4 cap screws holding the heat shields. Then pull the heat shields out about 3/4 in to get this thing under them. This pan pushed the heat shields out when I was Re assembling. I had to keep very firm pressure on the heat shields to get enough of the mounting bolt threads to get a hold on. This ten minute job took a very frustrating hour or so. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
11.24.2017
I like it!
|
This pan was easy enough to install and it gives me piece of mind. I put it on my Wing before a 3000 mile trip to Canada and was very glad that I did. Not that I hit anything that may have screwed the engine up, but the potential was there. I had to ride more than a few miles on some dirt road with fairly large (1" +) pieces of gravel on road that were undergoing repaving and the odd dirt road or two. I also like the fact that the pan is vented to allow air to circulate on the lower crankcase better than the unvented pans. I am sure this pan is not sturdier than the diamond plated pan, but again, I liked the venting. If the thing gets damaged by an debris, it will be replaced right away, diamond plate or not. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
07.07.2017
Very pleased so far!
| Seems well engineered and made. Install was straightforward and took all of 20 minutes. Fit is good. The front piece covering the oil filter and drain plug is good and snug. No rattles noted. Bike seems a little quieter at highway speed - could be my imagination! The pan should protect against most typical road hazards. Cheap insurance! |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
07.06.2017
Belly Pan Fitment
| I purchased this pan for the protection it will provide to the items under the Wing. Installation was bit tricky, but not too difficult. It is not a plug and play piece of hardware, that's for certain. It was a challenge getting it to fit over all four studs. I am look forward to seeing how it performs in terms of protection. The one thing that really concerns me is that it is pressed against the exhaust on the left side of the bike. I don't think this is a good thing. I would like to see some space between the pan and the exhaust. |
Performance Black Stainless Vented Belly Pan for GL1800
ITEM CODE: WS187416BK, SKU: WS187416BK
04.30.2017
Seems like a good pan - easy to install
|
This product is a black powder coated belly pan that comes to you in two pieces. The larger piece gets mounted to the rear and a smaller piece gets mounted towards the front and allows easy access (removable) to the oil filter. The front is held in place with (apparently) aircraft grade twist nuts that capture a wire after a half turn or so, which will make removal and re-installation simple. I was dreading the installation of this pan as I read many stories on the net about how difficult it can be to get a belly pan on your GL1800. This one was E A S Y. Put you bike on the center stand to make all areas accessible. Remove the two acorn nuts on the exhaust pipe cover plate (name? heat shield?), pull the cover away from the bolts that are (fixed) in place and slide the belly pan in over those bolts. Then get the acorn nuts started a bit to help hold the pan in position. The pan will flex a bit to allow placement over the bolts on the opposite side. Acorn nuts on that side and tighten all 4 acorns up. All in all (including time to figure out how to install, this job took about 1/2 hour and was simple. I just installed it, so I cannot report on its ability to protect the lower part of my engine, but it's there and WILL protect against most strikes IMHO. |