Very easy to fit,but make sure you gently bend it to suit,befor removing the tape backing.Clean the black plastic with panel wipe to remove polish and grease,will never come off |
Looks great when fitted,and a very easy part to fit,just take care you do not mark the paint when taking the old ones out,prise from the side,not the top or bottom |
Very good solid cover,take your time and bend it very gently untill it sits perfectly over the radio,make sure that all the buttons are free and able to move,the sticky tape might need trimmed with a stanley blade if it is binding on the buttons,remember to clean the radio with panel wipe to remove any grease or polish,gently heat the cover to activate the tape,and position very carefully,you only get one shot! |
For the price you pay for this Honda should fit it as standard.Very easy to fit,and very handy(watch the plastic clips when removing the left pocket,they spring out and fly around the garage like rockets,be warned) |
Looks great and made wih metal,so a bit on the heavy side,the fit is good if you do dummy runs first.When your confident use a heat gun to warm the cover up,this also activates the tape and makes it very sticky.After the cover is on press all around the edge of the cover to make sure the tape is in contact with the timing cover.No fear of this ever comming off. |
Take your time when you position them as the tape is very sticky.Gives the mirror a nice look |
Not hard to fit,and look brill,matches the drivers boards,suits the other half as well,so I'm pleased |
Very easy to fit,and looks great.very good finish,good buy |
This 6 Foot cable worked out Great for me, gave me reach I needed for my Mp3/GPS |
Product look o.k. but the adhesive tha comes with it was old i guess and i lost the left side the first time out . Kuryakyn would not stand behind their product so i had to buy another set and use a different type of adhiesive. It doubled the cost. as i add more stuff you can bet it won't be from kuryakyn.I spent over a thousand dollars at the dealer ship and this is what i get. Be careful of the adhesive with any product you buy from kuryakyn. |
I have had these on my bike for two years. They still look great. They do make the rear passenger feel more secure. Very sturdy and well built. The only problem I have had is with the drink holder. The allen wrench bolts on the side of the drink holder comes loose with every use. Needs tightening frequenly. Also some smaller drink containers has a potential risk of falling through the bottom. Otherwise I am very pleased with this product. |
Excellent safety item @ a good price. |