Contact Us
| Perfect complement floorboard inserts. Just left the Owens up around the edge pull me out and install the new ones. |
| Very impressed with this product. Great engineering, quality materials, easy installation. Really surprised at what a difference these risers make while riding. For me, being 6'5" tall, they put my arms in a more comfortable, relaxed position and I am able to sit back more. My grip is also more relaxed for less fatigue while riding. I would recommend these to anyone who rides a 2018+ Goldwing regardless of hight. |
| Like the box but hate the blue connectors. Had a problem with the installation of one of the LED signal mirrors but traced it back to the blue connector. Used solder butt connectors instead. |
| The mirrors look great and appear to be decent quality. I was able to fish the wires through without removing any panels and connected them to the Showchrome isolator. |
| Once installed the device works as advertised. Installation instructions are vague and provide little help once black and white wire is attached and that task was made easier by watching Fred Harmons video on how to install the sister accessory that produces a flashing idiot light on the dash only. The bigger he’ll experience is the remaining task of finding, accessing and installing the interconnect to the kickstand circuit which is simple stated as located on the rear of the engine. The diagram and the same in the mechanics manual stumped me as to location. I guess I was frustrated for enough time to give up as it was on a Sunday and no one to call for some help.Returned after a beer and Finally located the connection buried in the bowels of inaccessibility and getting to it on a center stand, disconnecting and attacking the harness goes down in my book as the most time consuming and frustrating task performed today…The air filter exchange being right up there with this install. Unfortunately there was not one video on YouTube or elsewhere showing an easy install for this device which was surprising. I am curious how this harness connection is made easier and perhaps why no video but ces’t la vie. I finally had to put the bike up on my J&S stand to get my hands near the connector. Had to use a hemostat and screwdriver to disconnect the connector on the rear of the engine and then to manipulate the harness connection which in this tight space is close to impossible manually. This whole install took me more hours then I had dreamed. Understand I have about 6 k in accessories on the bike and I installed every one, but this little ditty wins first prize. I’m no a Fred Harmon or Cruiseman but I would love to see a video on how EC makes this install look easy, doing it on the center stand, as most of us do not have lifts. When I finished this install I simply went in the house and got drunk. That’s my adventure on this topic. Patience- that is an understatement. I await the simple alternatives others enjoyed and the wisdom I could not find 😎. PS Wingstuff how about a install video with Eric. As you gave done with other accessories. 5 stars for the product 2 stars for ease of install and a -9 for difficulty. |
| so far these speakers are the best upgrade I have done on my trike. sounds amazing. |
| Cleaned up the trunk area and looks great. perfect fit. |
| Received very quickly and they look and fit as advertised |
| I have been through a couple windshields for my 2018 Goldwing. One was horribly noisy at times. This F4 arrived well packaged with a caution not to over tighten. I have had 6 Goldwings and many other bikes and changed windshields a number of times. I know to be careful. When I installed this tinted windshield and sat on the bike to look at it I found what appears to be a hairline crack at each upper mount hole. Also I have noted slight chips on the edge of the windshield. Knowing full well that once I have mounted it on the bike there is no recourse with WingStuff I pulled up my big boy pants and went for a ride. The 20" windshield works very well. I can keep it low enough to see over and the air is moved over me. I still get some noise in my full face helmet shield at times. After spending $600 CAD including shipping I am on the page of over priced accessories. I am happy enough with the performance (it cleans really well) but really there should be a less expensive alternative, but there isn't. |
| Good quality, good instructions, simple installation. Height is perfect for mu non-tour, but width is too narrow to keep wind off my shoulders. |
| The installation was straightforward, and I needed to ream out the drilled holes just a bit.Very pleased overall. |
