Contact Us
| WOW, What an increase in rear view vision. I can see 2-3 lanes over on both sides. Great when pulling trailer. Reduces blind spots. The signal LED are not visible till signal is activated so nice clean look. Sequential LED dot lights show direction of turn to the side drivers. Also good reminder for you to know when your signal is one. Easy install. Suggest watching some of the installation videos that provide some helpful hints. All wiring is uses the connections so no splicing and not wires needed to be ran back under the seat to battery. Take your time and its straight forward unplugging and reconnecting wire harness connections. Mirror itself is simple snap on. Your only decision is determining if you want the signal lights for greater visibility or just the mirror version. You will be glad to get the added view. |
| Bought these for my 2012 GW. Worked trying to install them for about 90 minutes. They slipped on easy enough but trying to get the covers on is way too difficult. I tried the ty-wraps and still couldn't get them together. They look nice but I would not recommend purchasing them. |
| These were simple to install (less than a minute) and look great. Just a little dab of chrome in what was a dark area! I always use a hair dryer to warm up the surface and the tape before installing. I've never lost a double-side tape item! |
| Love these lights, apparently they only come in chrome so out of luck for those blacked out models. |
| i Ordered Black gradient but they send me clear Gradient but it looks good |
| Purchased these floorboards elsewhere, due to being out of stock. I did get the black adapters and the right side fit with no problem. The left side however did not fit in the bracket on the bike due to the paint being so thick and possibly a flaw in my left side mounting bracket (2023 Goldwing DCT). With some sanding and filing I got it to fit and the floorboards look good and are sturdy. You will also need extra cotter pins, they are not included. |
| These were a straight forward install. I did have to unscrew the fog light to get to the second screw. It was not difficult and they seem very sturdy. |
| The ad for this cover says it protects from a light rain. The last one I had was water resistant for several years use. My new one doesn't even protect from falling dew or fog. I'll have to treat it with a $10 can of silicone water repellent. After an overnight in the motel parking lot, my seat was soaking wet. It would have been the same with no cover. My advice is buy the cheaper $24.99 cover and treat it with silicone tent spray. |
| Just finished installing the GT TOUR TRUNK LIGHT--It was simple and easy to install-Hooked it up to the trailer pig tail-fast easy and quick--LOOKS GREAT, WORKS GREAT--I LIKE IT---- |
| Just replaced bushings and seals in my 2007 goldwing. Refilled forks with oem fluid. Took it out for a test ride and was perfect. Nice smooth ride. Need 3 bottles total to fill both forks and have a little to use for parts lubricant. |
| Kit had everything you need to replace the bushing and oil seals in front forks. New hex screws, o rings, guide and slider bushings, oil seals and dust covers. Everything fit great. Will need a 45 mm seal driving tool & a long 6 mm hex socket for hex at bottom of forks. Partzilla has an awesome how to video but, this is where I buy all my goldwing parts and maintenance items. I’m no mechanic but I was able to complete this job. Take your time. |