Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

Chrome Lower Front Cowl for GL1800
ITEM CODE: BB52608,   SKU: BB52608

06.29.2008
Installed this with the fog lights. Just remember when you remove the OEM cowl don't forget to take the threaded metal clips off so you can use them on the new cowl. The instructions say nothing about this. I found out the hard way. Other than that turned out just the way I had expected. GREAT.
Was this helpful?

Telescoping Parade Flag Pole
ITEM CODE: RIPFPOLE,   SKU: RIPFPOLE

06.28.2008
Even if you did not but the trailer hitch this flag pole is great.Very easy to fold up and down and can fit in any saddle bags out there.
Was this helpful?

Trailer Hitch Parade Flag Holder
ITEM CODE: PG03736

06.28.2008
very easy to connected and disconnected,well made,this is the best flag pole setup out there. No more bungee cords to tie down your flags
Was this helpful?

Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201,   SKU: KU3201

06.28.2008
I just put these on my 06 wing, boy what a nice look it gives it!!! I just hope the lights last a long time.
Was this helpful?

Kuryakyn Chrome Floorboards w/Heel Shifter
ITEM CODE: KU4038,   SKU: KU4038

06.28.2008
I just moved up from a 2003 VTX 1800 R to a Goldwing GL1800.

After having heal/toe shifter and floorboards, I swore I would never go back to just pegs and toe shifter again.

Like everyone, with a bike that has everything why not driver boards and heal toe shifter as standard or option from Honda?.

At 6ft I need to move around a bit, a little getting used to the foot position coming from a cruiser. The GL1800 beats the VTX hands down, the VTX 1800 is a hard bike to ride, very rough on you, after a couple of hundred miles you're done for the day. The GL18000 feel a lot lighter to me as well, due to the low center of gravity.

Anyway getting off track, the boards, I only gave these a 4 star rating because of the lack of 'detailed' instructions, ok the instructions are ok, and these add-ons are really, really simple to fit.
However I had a lot of issues with the heal/toe shifter more on this in a moment. The brake arm took a couple of rides and adjustments to get this right. Peddle too high and you have to lift your whole leg and foot not just hinge on your heal, too low and you can't press the peddle. After setting the peddle so it just peeps above the board I can just apply a little pressure for control in slow moving traffic, u turns etc. and little more pressure for a sure stop.
Perfect now.....

The heal/toe shifter took a while to get right, I played with the Pin Drive Wrench and several test rides, but still could not get them to work right. The shift would simply not return to center so I had to tap the shifter in the opposite direction each time I changed gears. A pain in the rear to adjust have to keep taking them off adjust the pin drive and reseat and test. I was just about to give up and take them off when I visited my local dealer where I purchased the GL1800. They gave me the solution and after I did what they suggested these are perfect. Had the solution been in the supplied instructions I would have gave a 5 star rating and one fit would have worked out of the box. So what was the solution....

I undid the pin drive and took the shifter collar apart. I covered it in grease, I used some high quality white lithium water proof grease I had. I rubbed it all around the collar, in the hole and put the unit back together. I used "RED" thread lock and tighten the collar up as much as I could. With the grease in place the where free, very free, be-careful when you put them back on the Bike that they don't swing and mark anything.

I also sprayed WD40 on the shift fork bushing(covering the bike first). After I put the floorboard back on they where perfect. Changed gears and returned to center all the time, very smooth.

I would not hesitate to recommend these boards, but take the time to grease up the pivot shaft.

ride safe
Deanh
Was this helpful?

ITEM: BB2445

06.28.2008
Take a little time to fit as its quite fidly.Nice add on
Was this helpful?

ITEM: WSRACKBAG

06.28.2008
Well done Wingstuff.com.This Rack Bag is just great,well made,nice to carry,easy to fit and looks cool fitted on the rack.
Was this helpful?

ITEM: JMHS-BCD291-UNV-XHO

06.28.2008
This is the second set of J&M headsets I have owned and OH MY GOD what an improvement!!! They sound fantastic, it's now a toss up for listening to music, speakers......Headset....HMMM.

Let the wife decide!!
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

06.28.2008
I bought these a few weeks ago with a bit of skepticism... I was suprisingly wrong... These are the greatest... You don't have alot of positions to put them in because of the wide fairing on the Goldwing but they allow you to stretch your legs on long rides (the reason I tried them to begin with) I would buy these again.
Was this helpful?

ITEM: WSGL18CA

06.27.2008
Can't beat the price and eliminates the problem of small items rolling around the trunk or saddle bags. Also improves the attractiveness of the luggage compartments.
Was this helpful?

Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029

06.27.2008
Looks GREAT on my 2008 Titanium Gold Wing. I had the dealer install it as part of the original delivery of the bike.
Was this helpful?

ITEM: HO08V31MCA100B

06.27.2008
I had the dealer install them on my 2008 Gold Wing as part of its original delivery. They look great and will help protect the fog lights.
Was this helpful?

29737 Reviews Found

| 2151 |