Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

Kuryakyn Armrest w/ Drink Holder for GL1800
ITEM CODE: KU8991,   SKU: KU8991

08.03.2008
I agree that one person CAN install this but I think I threw my colon out while trying it. I also was nervous about drilling holes in my scooter so I measured four or five times and drilled once. When I put the left armrest on the passenger intercom was in the way AFTER I had drilled the holes. It was an easy fix I just pulled the intercom holder out installed the armrest then put a dot bright green paint on the pegs that hold the intercom receptacle in place put the holder to the bike under the armrest and drilled two new 1/4 holes. Then I put a dab of marine adhesive in the hole and a dab on the back of the intercom holder put it on the bike and viola. It would be nice if kuryakyn would have mentioned this might be a problem. They look great and Sugarbritches (aka the wife)loves them! WINGSTUFF beat the competitions price by $50, that's almost a pair of rear speakers. I love this place!
Was this helpful?

Beverage Butler Motorcycle Drink Holder
ITEM CODE: PG02084

08.02.2008
don
got the 20oz up front... liked the size of the cup. was going to get 34 for the wife in back, but she preferred the 20 oz felt it was easier the handle... just buy them.. they are great...
Was this helpful?

ITEM: PG01048

08.02.2008
don
installed on bike the week before my trip to nashville.....was a good add to my bike...used them in the rain to direct the rain away from us... had the lower wing adjust the air away(heat) and top wing direct the air toward us... happy with purchase...
Was this helpful?

ITEM: KU4057

08.02.2008
Very comfortable, lots of area to use, nice to be able to strech my knees out. Instructions are a little unclear, but pretty easy to figure out.
Was this helpful?

Chrome Footpeg Mounts for GL1800
ITEM CODE: KU4544,   SKU: KU4544

08.02.2008
Completed the side chrome. Look great, heavyduty, easy to put on.
Was this helpful?

ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183,   SKU: KU6183

08.02.2008
These I like. They actually went on pretty easy. Was afraid it would be a nightmare from previous posts. They fit my hand great. I didn't really see any difference in how fast they warmed up. But it is however August.
Was this helpful?

Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071,   SKU: KU4071

08.02.2008
These work much better for stretching out my long legs. I also had to really crank down on the supplied bolts to get past the blue loctite. Overall though nice addition.
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

08.02.2008
These pegs are the best on the market. I have seen many other types and makes but they don’t match up. I’ve had these on six months and find them very comfortable. The chrome is top quality.
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

08.01.2008
Does work as advertised. Nicely adjustable for a wide range of positions. Quality of the finish is good but the castings are a little on the cheap side. Price is a little high for what you get but there aren't many other pegs to compete with the Kuryakyn.
Was this helpful?

Universal Kickstand Extender
ITEM CODE: KU7109,   SKU: KU7109

08.01.2008
Received this today. Couldn't tighten on the original kickstand without several wraps of electrical tape.I hope it works better than it fits.
Chuck
Was this helpful?

Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071,   SKU: KU4071

08.01.2008
They fit my Kuryakyn Gold Wing GL1800 Iso-Wing Adjustable Highway Boards (not sure if they are the same as the non-Iso-Wing boards). Becasue they have lock-tite on them, I did have to "crank" the bolts to get them past where the Lock-tite was applied. Could that be the issue others are facing with the bolts? Not sure . . .
Was this helpful?

Rear Fender Chrome Trim for GL1800
ITEM CODE: KU9017,   SKU: KU9017

08.01.2008
I liked the result with mine. I fussed with the curves a little bit before removing the tape and got it pretty close to perfect. Like a lot of other aftermarket stuff it could have tighter tolerances for the best look. It really looks nice now that I've added the wider three hole exhaust trim.
Was this helpful?

29796 Reviews Found

| 2130 |