Contact Us
| Great floorboards. Instructions were OK and install only took 30 minutes. Plastic striker plates are disappointing and will not endure more than a couple touchdowns. I'm replacing mine with some homemade stainless ones. |
| Very nice rack for light weight gear. I added the larger star washers to spread out whatever I put on the plastic. Smooth install with good instructions. However, drilling your trunk makes you pucker... Tripple check your alignment and drill small pilot holes. |
| Had ours just over a year and still going strong. As simple of a switch as it gets. Plug it in. That's it. Eventually we will upgrade to the J&M with p.t.t./on-off/volume control when we get the CB radio, but that is a few dollars down the road. |
| I just came back from a 1500 mile ride/4 days. to Utah & AZ, NV. The temps hit 115 degrees. I was OH so thankful I put this on before this trip. I put a tall 1 liter bottle in it. It worked GREAT! Yes, the swivel did tip a bit but I never lost any water or the bottle itself. I would recommend it. |
| Ride a lot w/ two up and a trailer? Tying into the existing air system with the optional kit the ride is so much better. |
| Big difference the bike when you upgrade to these. Wouldn't go back to stock for anything now. |
| Great item. Haven't had to use them for myself but will come in handy the time I forget to turn off the accessory. |
| These grips are so comfortable and they help finish my matched Kuryakyn look with my passenger boards, driver pegs, brake pedal & highway boards. |
| I bought the color matched blue to add that extra something to my grips. |
| Fit perfect. Good call to Michael's review below. One more thing, the washers must also be smaller OD than those supplied with the highway boards. |
| A great addition for any passenger as all mine have appreciated it. I made sure to get the extended arm brackets so I don't have to move them out of the way to open the trunk. |
| Very strongly recommend replacing your filter with the K&N. You will save so much money as an OEM filter from the dealer costs about 40 dollars. |