Contact Us
| I had them installed when I bought my bike in 2007 and have not been sorry. The only problem is you must lift your left side in order to put your kick stand down. Be gentle in shifting or you will break your shifting fork inside the transmission, mother Honda will not warrenty if you show up at the dealer with Kuryanyn Floorboards. |
| Had these installed on the bike before I picked it up. They work great and light up the area around the bike nicely. |
|
Second review, I wish to add a bit of information to my first review of the Progressive Fork Springs. I found if you cut the preload spacers that come with the OEM springs, lighter or smaller riders can enjoy the benefits of the Progressive spring. I trimmed 1 inch off the preload spacers and the springs work fine. The bike doesn't dive when braking, the ride is a bit firmer but you still have a nice comfortable ride with a frontend that will work well when are cornering or if you just a dip or bump in the road as we have plenty of those here in the midwest. If you want a firmer ride just cut less of the preload spacer. To give you a starting point I am 5'8" 175, you can make your adjustments from there. Good Luck, have a safe ride! |
|
HAD TO HAVE SOMETHING FOR WIFE AS I PROMISED HER I WOULD BEFORE ROADTRIP THIS YEAR.EXACTLY WHAT I WANTED,,BETTER HALF LOVES THEM!! IT DOES TAKE TIME TO FOLLOW INSTRUCTIONS BUT WORTH EVERY MINUTE WHEN FINISHED. GREAT LOOK AND BEST OF DOESN'T INTERFERE WITH GETTING INTO TRUNK LIKE OTHER STYLES!!! 2 THUMBS UP!!! |
| I cant believe that they would not include the spring and ball. But I was able to change it without much trouble. My wife loves them! |
| This is a great product for the price. It works perfect! |
| For the price these are really hard to beat when compared to the Honda Line ones for around $80.00. Fit is good and they do the the job they were intended for. |
|
Considering the price of the headsets, this cable should be included with them. But yeah, it works and seems to be of good quality...so 5 stars. |
|
Not only is it small. You would think , you remove 2 screws then put the screws back up the slot then tighten. BUT NO !!! It took three people 45 minutes to figure out the slots wernt long enough for the screw to go straight up in to the hole. So you have to put a drill to the slot to elonggate it to make it work. Quite a learning experience, an a royal pain in the BUTT!!!!!!!!!!!!! |
| I lose a couple and thought of a bright idea. I took all of them off bike, and super glued them back on. Haven't lost one since but I do have spares. |
| This is an accessory that should have been included on the GL18000 from the start. The difference it makes from the wind defection is signficant for the driver and passenger. I give it 4 stars from the weak means in which you can adjust the position of the defectors, it is a friction bolt, and as we know, over times, losens and then you must have a wrench to tighen it up again. I wish it was re-engineered to have pre-selected position notches. Install time 30 mins! |
| Perfect accessory for that GL1800 spoiler. I added this before I installed the spoiler which made it simple. The product comes safely shipped in a clear plastic tube and the Plug N Play wiring is easy as 1-2-3. Highly recommend this and being a novice installer, it is a confidence builder! Install time, 30 mins! |