Contact Us
| This is the second winter season I have stored my bike using the Battery Tender and not one worry about a dead battery or the cold freezing it. It is a must if you store your bike for any length of time. It's a smart investment. |
| The directions were horible. If you've purchased the risers, be sure to attach these to the posts for marking out the holes, I made this mistake and found I had to retap the holes which were off. Almost came close to needing to purchase a new lid for the trunk at $379.00. Also make sure you have a drill with appropriate bits and tapping thread set as I found 2 of posts were not drilled completely and threaded. After speaking with Honda, I recommend buying a Honda Luggage rack as they already have holes marked out inside the GL1800 trunk lid. Took 4 hours which includes time to hardware store. |
| Bought them, drilled the holes and installed them. One has disappeared and another one is coming out of the hole and the base is tearing through. Disappointed but will buy another set, have to I now have holes in my trunk. I have to put something in the holes. |
| Bought the lowers in purple. Didn't have the hand wings in purple. Boo. So I made my own out of black 1/4 plastic material. Why should I buy black ones that do not match my uppers when I can make my own uppers for alot less. Again Boo. |
| Easy to install work well. Thought I would have a problem working around the mirrors but I was worrying about nothing. You will like the way it looks on your wing. Bling, bling! |
| Bought them like them alot. Easy for me to install even though I had to drill holes, templates worked well. Take your time installing them and you should not have a problem. |
| Bought 2 one for myself and one for wife. Two things I have found helpful if I misalign the release I have found that if I press on both release tabs and push the two halves together I hear a click and then just pull while still holding the release tabs in and it should pull apart. Another help is if when latching I put a thumb and forefinger on each side of the female base I can feel if one of the pins are misaligned and trying to slip through on the outside. |
| Installation took about 30 minutes. Very well made (for the cost it should be). It is a 30mm required hole. Drilled it with a 1&1/4 inch hole saw, then gently cut out the extra 2mm with a step drill until it fit perfectly. |
| All I can say is BLING, BLING! These look great on the bike and really give the engine a make over. I have received many compliments on them since added. Very easy install, nothing to take off they just go over the original covers... |
| I went with these lights because they match the headlights beam color, I hate it when lights are different in color than original lights. With that said they look great on the bike and for me added a little more piece of mind that you will be seen. Really do make a difference while in cornering and in fog riding, you can see the road better! They also really light up the front end nicely, installation was a little bit longer than I would have liked, but got through it, make sure that you adjust them before replacing the lower cowl, but other than that a great add on. |
| I really like the added bling it gives the front end of my 08, even more so after I painted all my lower cowlings the same color as my bike, really pops! A must, my riding buddy could not wait to get his in after seeing mine.... |
| I feel these are a must for looks and to also be able to get under the rack better for cleaning. Also even though I did not have this problem like a friend did, they will cover the holes you have to put in the trunk better if you dont get the hole right the first time. Take your time on the install and you will be happy with the final product! |