Contact Us
|
Excellent heavy weight cover. Looks great too! Bike sat out in the rain and the cover kept it clean and dry. Only downside, the elastic strap that goes under the bike is not long enough to reach all the way over to the grommet. The cover has enough elastic around the bottom to hold it down on the bike though. |
| WELL, THESE GRIPS ARE INDEED PRETTY GOOD, THEY FEEL COMFORTABLE, WHEN RIDING AS WELL, THE HARD FEEL AT THE HANDLE BARS ARE GONE-LOOKS GREAT TOO- YEA GO AHEAD & BUY THESE.GOOD PRICE !!!!!!! |
| love the shorter 4.5 arms make riding on my hyway pegs alot more comfortable replaced the 6" arms also added the light inserts. |
| Dresses up the fairing very nicely. Just use a screw driver and a towel when removing the stock vent so you don't scratch the paint. |
| Very simple install. Took a total of about 30 minutes. I didn't wire mine to flash with turn signals. I spliced mine into the wireing from the pasenger floorboard lights. These lights really make the bike stand out at night. |
| Works like it should. Instructions could be better. After you plug into your spoiler the other end plugs into connectors behind the panel that your license tag is mounted on. Hope that helps. |
| Nice product rack is high enough that you don't need risers even with the spoiler only thing is if you order star washers with it you will need longer screws. |
| Second review. Still like it but having a problem. The rubber insert inside the extender that grips the stand came loose and eventually disintegrated. I cut a piece of rubber from an inner tube I keep around for such occasions but did not glue it in. My bad! It came out and the extender is loose again. This time I cut a long piece of rubber folded it and glued the folded pieces together. It's now thicker and I will glue it to the stand also. If this does not work I will drill another bolt hole as someone else did and see if that will solve it. I would still buy it and want it to work and eventually it will. I like the way it looks and the way it works, when it works. Failure is not an option! |
| Put the new hitch on 2010 wing today, took me 4 hours and the hardest thing was replacing the rear fender. Broke one of the plastic mounts on saddle bag, now have a small cap.Believe the problem was had to spread the bags to get the holes to line up in the H bracket. |
| This is the second winter season I have stored my bike using the Battery Tender and not one worry about a dead battery or the cold freezing it. It is a must if you store your bike for any length of time. It's a smart investment. |
| The directions were horible. If you've purchased the risers, be sure to attach these to the posts for marking out the holes, I made this mistake and found I had to retap the holes which were off. Almost came close to needing to purchase a new lid for the trunk at $379.00. Also make sure you have a drill with appropriate bits and tapping thread set as I found 2 of posts were not drilled completely and threaded. After speaking with Honda, I recommend buying a Honda Luggage rack as they already have holes marked out inside the GL1800 trunk lid. Took 4 hours which includes time to hardware store. |
| Bought them, drilled the holes and installed them. One has disappeared and another one is coming out of the hole and the base is tearing through. Disappointed but will buy another set, have to I now have holes in my trunk. I have to put something in the holes. |