Contact Us
| Overall, looks great once installed. A little disappointed after a day of riding. 3 lights on my trunk are flickering on and off, mainly off. I feel a little cheated on the quality. |
| This is AWESOME. Super easy installation, just snaps into place. I bought this as an addition to the Kuryakyn Driver's Stainless Drink Holder for holding 16 oz. drink bottles. SUGGEST WINGSTUFF TO ADD AS A "PACKAGE DEAL:. |
| This is AWESOME. Super easy installation. You will need to have the correct size allen wrench though. Super convenient and not at all in the way of controls. Adds to riding comfort on long trips. Highly suggest adding the KU1459: Kuryakyn Cruiser Universal Beverage Carrier that snaps onto this holder for 16 oz. drink bottles. SUGGEST WINGSTUFF TO ADD AS A "PACKAGE DEAL:. |
|
1st & foremost. They are well built. This is the 1st time using a heel / toe shifter. I hope it gets easier to look graceful. I find the brake pedal to be high, which results in lifting brake foot off floorboard, I double checked position and it is correct. I may lower one notch in a few weeks if I don't get the hang of it. Better now then during summer traffic. That is why I give it a 4 rating. |
| The unit install is a little cumbersome compared to putting one on my GL1500. (different model) The edges were sharp, so had to pay attention. Not sure how the fasteners will hold up, time will tell. The main thing is it will protect the bottom! |
| I have a 11 high by 15 Marine flag. Will it fit? |
| After talking to Dave in service about the wobble in the front end of my 1800, he told me that he recommended that I replace the head bearings with the all balls, and a good fork brace. After removing the stock bearings and seeing what Honda had used I knew that I couldn't go wrong replacing them. The All Balls bearings are so much superior than the stock, they aren't even in the same realm. Install was not that bad of a job. Just like anything take your time, read directions, and you will be very happy with the out come. The bike now handels better than it did off the floor, by far!!! Dont procrastinate about fixing the problem we all deal with riding our wings!!! You will love the difference these make. |
| I like this battery charger, works very well. I would recommend this item to any of my motorcycle riding friends. |
| Two stars because: The rear plate bolt threads were full of powder coat. Had to remove plate and chase threads with a tap, could not get the bolts started because of the paint. Can not get the left "L" shape bracket flush with the brace I have a 1/4" gap, but it is tight and hope it does not cause any problems. The receiver would not go up the hitch plate. Had to file both before it go all the way up. Then the clip for the hitch pin did not fit and got stuck. Had to cut clip off, then drill it out. I do feel this a good hitch. Just check the bolt threads for paint, and put the clip in the hitch pin before installing. |
| Went on easy. I read alot about sharp edges, after 30 years of being a machinist did not notice or get a cut. Too early to see if it works. |
| Love the simple smooth look. Install with the ignition accent pad and new grips. Its all the chrome I want. |
| Just a small touch, but looks great.Take less than a minute to install. |