Contact Us
| I installed this last year. I agree with the other reviewers, these lights are what drivers behind you will see first, they are bright. I did order the plug and play harness too, via a phone call to WS. The EC part# 08102 for 1800's, 08101 for 1500's. (you still need to connect 3 of the 5 wires of the harness to the 3 wires on the light, but you won't be splicing wires in the boot, the turn signal wires are not used. EC included harness installation directions were right on). I chose the clear lens and mounted it above the license plate since I have the famous eagle license frame. |
| I installed these on my 2007 wing and experienced the same favorable advantages that others have written about. When I installed the rubber bumpers I sprayed them and the hole with some "Original Spray Cleaner Polish" pn. TR530396 and they went through the hole fairly easily especially if I wiggled the bumper a little. The spray polish also works well to install and aids in removal of the side covers when sprayed on the rubber gromets. |
| I installed the Ku 7339 Gen 2 fork brace in 2011 and noticed an instant more solid feel in the front end of my 2007 Wing. I have not experienced the wing wobble on that bike so I cannot relate to that issue. The install was easy and straight forward. One side of the bracket was a bit snug but it did fit after some persuasion. A solid nice looking brace with built in dust covers. |
| I installed these several years ago and they have held up well and are a great looking accent to the bags at night.The install was easy but one suggestion that I would make is to slightly warm the attachment screws with a propane torch or match [unless you are installing during hot weather] as mine had a tendancy to want to split the plastic that the screw goes into. Be carefull to just warm the screws so that they are very warm to the touch-too hot and they will damage the plastic. |
| I have used this cooler rack now for several years and about 15,000 miles. It is made of aluminum so it is very light weight but has held up very well. It sure is nice to be able to have an extra place to carry a cooler and such. It can be easily removed when needed and all you see is the hitch on the back of the bike. |
| A well built trailer hitch. Fits well with little effort.It took about 11/2 hours to install. Works well with the 11x16 receiver cooler rack. |
| Just got these in and this is the third set of tires I have us these on. Very happy with the out come. Good milages. |
| This piece was very easy to install. I purchased it because a friend with a 2012 Wing encouraged me to. I am glad I did after I saw what all it was protecting. It is a must have. I didn't have a problem with the installation. In fact, I accidentally threw the installation instructions away a few days prior to installing and really didn't need them. Simple install and pretty obvious how everything is suppose to fit. |
| Real diissappointed the discription says they were made for trikes so I order them. could only use two of the garmet mounts had to leave bottom loose. Thank you Mr nylon tie wrap for holding them in place. The main problem I have is I oerdered them for a Trike. Oh yea they look good don't get to close you see the tie wrap |
| Ordered mine and it was shipped the same day and before other items I had ordered from different sites. I will always look here at Wingstuff.com for future orders. Low Prices and Fast! Install of pan was easy and looks great. |
|
Difficult to gauge improvement with out having another wing along side with the OE speakers. Swapped out fronts & rears, can detect a slight difference, but jury still out until riding season begins & a more complete comparison can be made. |
| I put this on my bike and OMG.. Its really a nice look. This is a must get. See my pictures and see what you think. |