Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

Fender Accent Filler for GL1800
ITEM CODE: BB52801,   SKU: BB52801

08.24.2012
Nice product. Tight fit. Well worth the money.
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

08.24.2012
I have had these on for several years and I would not take long trips without them. Really easy to install and can adjust to many positions.
Best part is they flip up and out of the way while the Wing is parked in the garage so you don't test their structural integrity with your lower shins!
Was this helpful?

Passenger Drink Holder
ITEM CODE: KU1481,   SKU: KU1481

08.24.2012
Install was easy enough. But I agree that the retaining rubber "fingers" are stiff and long! This causes a lot of "push" to get larger drink containers in and a lot of "pull" to get them out. I have only had on for a short time, but I suspect I will have to monitor the nut and bolt tightness.
Deep pocket/basket doubles as a storage area for smaller items - glasses, house keys, cell phone (small ones), etc.
Was this helpful?

Antenna Flagpole w/Flag for GL1800
ITEM CODE: KU4233,   SKU: KU4233

08.24.2012
I installed this shortly after I got my '07 Wing and reall like the way it looks and the way it installed. Yea, as stated, the flag wraps itself and unwraps itself...but I just make sure it is unfurled when I get on or off. My original flag lasted about 20K miles, and was badly frayed on the end. Make sure you replace with the correct size Kuryakyn (or other??) flag - it is about 4 1/2" X 6". The top stem does unscrew, but I used a towel and light pressure with some pliers to convince the removal process. I also used a small amount of anti-sieze grease when I re-installed.
I have had no wear or damage to my trunk lid or Kuryakyn book rack.
Was this helpful?

Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201,   SKU: KU3201

08.24.2012
These lights look great! However, as much as I enjoy watching Chris the Kuryakyn guy and his installation videos, the reality is a bit different.
Trunk install: these stock trim pieces came off easily; and the 2 side pieces went on easily. But the longer center piece was a bear to "snap" into the various places...but it did go on. The supplied installation instructions could use a lot of help when it came to the plug-and-play wiring. They tell you to unplug either the red or blue connectors...but realize there are 2 red and 2 blue. Pick the color you want and unplug BOTH (a 3 wire and a 2 wire I think). Plus running the 26" extension wire under the trunk lower housing was not as simple as the video seemed to indicate.
Then come the saddlebags. Removal of the saddlebag door mounted pieces was OK, except geting to the screw adjacent to the bungee connector was tough - and even tougher during the install (you are threading the retaining screw into virgin plastic). But that went OK. The shorter corner pieces were more trouble. The stock pieces have two-sided heavy-duty tape to hold them in place i addition to the 2 rear screws. Once you pull that corner piece off you will need to remove all the remaining old tape and residue. Get some Goo Gone and a putty knife and clean that area well. The instructions indicate drilling a 5/16" hole, but you need to drill 2 holes and I had to go up to a 3/8" bit to get the connector through the holes and behind the light. Make sure you drill where the wire can come up behind the light fixture and not impede the 3 housing retaining screws. Then when I was almost done, the left (and LAST!) corner piece simply would not fit. I had to slightly enlarge the exisiting holes that the 2 screws feed through to get the protruding stem to line up and fit. Then the piece went flush as it is supposed to fit. I opted to have a real Honda service guy with splicing and soldering in the lights on each side vice the snap clips. I was told that this is a much better install method to prevent shorting.
I took my time and it took me several hours to accomplish. I repeat my opening line - these look GREAT!!
Was this helpful?

ITEM: PG33765

08.24.2012
This jacket is well made and tough. Excellent air flow, and very comfortable. The liner works well and is very easy to get in and out of the shell.
Was this helpful?

LED Rear Fender Tip w/ Run-Brake Accent for GL1800 2nd Gen
ITEM CODE: KU3236,   SKU: KU3236

08.24.2012
This piece really compliments the rear vertical ligt strips. Makes the rear end of the 2012 complete and they are really bright. Nice quality and simple install. 5 stars
Was this helpful?

ITEM: WSS500GS

08.24.2012
Great lightweight cover for daily use. I ride to work every day. I cover the bike at home and at work so this cover gets daily use. I am currently on my second cover. First cover lasted about 18 months in central Georgia in about 50 percent sun 50 percent shade. The cover never left any scratches from being put on and taken off regularly. It does protect from the sun and dust very well. My 2 year old wing looks showroom new still. Water does get through a little but is not of concern to me.

Also, another kudos for Wingstuff staff. You guys are awesome when it comes to customer service. Received my shipment in 3 days.
Was this helpful?

ITEM: PG32056

08.24.2012
I purchased these to help tame the wind a little more. Had these previously on my 1500 and loved how the air could be adjusted to suit my need. They work even better on the 1800.
Items came packaged safely and all pieces were accounted for. I did not have any thread problems. Install instructions were easy to understand. Install went well with the only concern of having to drill holes in my beloved Wing. After install was complete the holes were not even visible. I chose the dark tint and the black brackets to match the black paint. It complimented the look of the wing.
Was this helpful?

Bridgestone Tire COMBO for GL1800 G704/G709
ITEM CODE: WSBRCOMBO,   SKU: WSBRCOMBO

08.23.2012
Great looking tire wanted to try something different. My first 633 miles yesterday handling was great let the bike roll easy in turns stuck well thru fast corners. I will update later once I get more miles on them. but so far very happy. Really wanted a good rain grove for the front that was my first look at the tires when I was searching. Very quient also overall maybe alittle softer than the E3's my last E3 lasted 15 front and 16 plus on the rears. I'm hoping these will last the same.
Was this helpful?

Gen 2 Chrome Fork Brace for GL1800
ITEM CODE: KU7339,   SKU: KU7339

08.23.2012
Changed the Handling of the bike at slow speeds. This item is excellent and easy to put on.I would have put % stars but it looks add on if it had joined the front guards like the plastic ones (original) then it would have been 5 + stars.
Was this helpful?

ITEM: WS187416

08.23.2012
Excellent item, but rattles at the front section. I replaced one that was there and it has kept the engine cooler, it has as did the last one saved damage to the under neath would not ride without one must have should be a standard item on every wing. This also gives better handling when side winds or truck hit the bike.
Was this helpful?

29809 Reviews Found

| 1376 |