Contact Us
|
At the end of the season, tried 3 brake pad sets with those rotors I can share what I've got. 1. Rotors installation is easy. The are really quality made. 2. If you don't have aftermarket rotor covers you'll appreciate those rotors look. There were many people saying "Wow". 3. I cannot say those are worse or better than the stock. My brakes improved noticeably. Everyone who rode my bike mentioned that. 4. Sorry Galfer, but your brake pads do not work. I put 1000 km with those front pads avoiding any hard braking allowing the pads to brake in, the brakes still were weak. 5. Oem brake pads work a way better, allowing very good "sharp" brakes in the beginning but still going weaker the harder you push the lever. 6. Traxxion pads work equally to OEM, with opposite difference: they are not as sharp as OEM in the beginning but they really allow you to brake hard increasing the stopping power according to the lever pressure. 7. Rotors became rusty when I didn't ride the bike for a few days. Rust was gone under the first brake apply. 8. Those rotors requiring warming up. 9. They do not care about water indeed. There were no difference in braking when I rode on to the wet road or under the rain. 10. I did not test those on heat resistance, but I presume - it is all correct, Galfer says about it. In total, I am happy with those rotors, and consider this item worth spending, however you know brake power depends on many factors including pads, liquid, all those valves etc. in my case, replacing the damaged OEM rotors I would do it again for sure. |
|
I had this for nearly two years before installing as I got cold feet over my choice of aluminium. However, there is now a lot of positive feedback from long term users. The shaping, welds and fittings are all first class. The whole unit weighs less than the OEM CD player that I removed. Very impressed by the well thought out and precise fit, they've covered everthing. Love the fact that's it's totally invisible when the tongue is removed and fitting/replacing takes minutes. Towed a single wheel trailer 3000 miles on my first trip with it and it handled it all. Single wheelers put more stresses on hitch that a two wheeler. Big twisting forces a hitch is not really designed for and often, just as much downforce as a heavily laden two wheeler. Great product ! |
| Installed on my V Strom and it really lit up the rear of the bike. Within only about a month, the brake light wire broke off flush with the termination in the light. I was able to get it soldered back on and epoxyed the wires in place in the case. Guess the running light wire was broken too, as the brake light is all that works, but it's forever in the epoxy! |
| My back end really stands out. They are a must have if you want to be seen in dark. I had my shop install them without the harness, but recommend to get the harness and save you some time on installaltion. |
|
For sure. I don't know if I could have figured out the MP3 player if I hadn't of purchased this software. Can't say enough good things about THIS, OR the player! Rocks!!! |
| Bought a pair this summer they are not very good |
| This is a necessary addition to your wing. The cheezy little plastic bearing will never compare to this all balls bearing set. I also had my dealer install the traxxion spring set, and superbrace at the same time. WOW! What a difference in handling. A trully worthwhile investment. |
| Easy 30 minute install. They look great and I love the look they create. |
|
Wish I had thought of adding this addition sooner. When I realized just how much pitting had occurred on my chrome cowling, I purchased this extender right away. Better late than never. Looks great, not planning on driving off any curbs, and it is highly functional. Install was not bad, I chose not to remove the fender, but I did use a small block of wood when drilling near the tire to insure no tire puncture. |
| Great little piece that and a touch of class to your fender. E-Z install. |
| I've had this pan on for a year now. I can't tell you how many times I have been thankful that I had it on. It offers great protection and helps keep all that road tar, etc. off the engine and components mounted under the bike. I found it a bit tough to install on my 2012, but it was worth the effort. The front also removes easily when changing the oil. Definitely worth the price/effort! |
| After having paid double the price for most motorcycle accessories, it was nice to finally pay a fair price for an excellent product. I highly recommend them to everybody. They work well with the heated grips as well. |