Contact Us
|
The front wobbles, GONE! A pain to install but well worth it. |
| Received this quickly and followed the instructions and had them mounted in about one hour. Everything went great until I found the mounting kit was missing two screws. Wing Stuff again cam through by shipping out the replacement screws right away. Great company. Not sure how effective they will be been to hot to get the wife out to ride, but hope they help with the wind buffeting she seems to get on the back of the bike. Already have the Wind Wings on the mirrors. Again thank Wing Stuff. |
| It is a simple design and works well on most smart phones , but, it will not fit the Samsung Galaxy S4 .It is just to narrow for it. |
| Nice Looking, Adds some leg position options for the co-riders. But the Rubber Treads on the outer Transformers keep falling off . As nice as they look, they look equally bad when the treads are missing. Purchased these for a Christmas Present 2012. Kuryakyn even sends extra tread so you know they know of the problem. The Glue send in the kits was Dried up when I tried to use it. I am now out of spares and have 2 missing Tread on one side. :( |
| Installed them just yesterday. Extremely easy install. Rode all afternoon with them. Different feel then the OEM pegs. I really like them. You actually feel more connected to the bike. I am very pleased with them. |
|
The flat black on our 2013 saddlebags annoyed me but I hesitated on getting this particular trim piece since I already had a battery cover that I liked better than the battery cover intended (rubber insert to guard against shoe scuffs) for this saddlebag trim. After seeing it on the bike, I could not be happier. It also added some safety lighting (looks like an infinity light) from a side view as well as another turn signal. The install went very well except for getting the hinges to line up to re-attached the saddlebags. My wife saved the day by coming up with a little cheat by having me screw one screw in without the reinforcement bracket in place to pull the hinge in close enough to get the other screw to thread in with the reinforcement bracket in place. After the second screw grabbed, then we took out the first screw and rotated the bracket into place then put the second screw back in. Other than that, follow the instructions and look at the pictures and you should not have a problem installing. I am very happy with the look of the bike now as you can see a before and after picture in my gallery. |
| Nice solid hitch but kind of a bear to install but with some patience I got it done. |
|
installed on 2012 for a trip to glacier nat park. worked great,did not effect the ride quality at all. lots of room and plenty of side pockets.. worth every penny.lost one of the covers that protect the lock,however that was my only snivel. would buy again |
| Just got in the 34oz cup and holder. I know that they said it was large but I didn't think it was that large. No I am not complaining by any means. It was easy to install and even with its size it doesn't block any of the controls. It sits in just the right position to be able to just lean over and take a sip without a lot of fumbleing around. When my Harley riding friends first saw it they laugh at me. After our first gas stop they were all asking where did I get it from. I think that I just might sell them the link. |
|
I bought one of these because I was cheap and didn't want to spend a fortune to carry a cup of coffee or a bottled water.I have had it on for two years and never had any problem with it. I have shoved about everything in it and I have put over 30000 miles on my 2008 gold wing . I just came back from a 4000 mile ride and the only thing wrong is I needed another one to add another bottle of water so I don't have to stop and get one out all the time. I think if there is a weak spot on it ,it has to be the mount although I have not had any problem at all . I would suggest you watch how much touch you tighten the bolts .They only need to be just enough to hold it tight . |
| They work great for a while, but very disappointed with how quickly they wore out. Going back to OEM. |
|
After having enjoyed the LED rear fender light for 7 months, the left side run LED's went dark. The brake lights continued to work. After checking my connections, I determined that the problem was with the product itself. I was prepared to have to eat the cost of buying a new one. I called WingStuff and after providing my order number from my receipt, they agreed to send me a new one in exchange for my defective one. I had my new light in 3 days. I am a WingStuff fan for life! |