Contact Us
| In retrospect to my earlier review. If you have all three pieces of wiring these are a snap to install. I guess that is why K wants you to solder them in. One must be careful that you install them to have them look the same on both sides. Get your location on the first and make a cardboard template and reverse for the other mirror. Make sure all is working before closing up the rubber boots on the mirrors. The tiny plugs on the lights can install both ways but with different results. I am happy with mine but when you start out at the $50 range and end up at the $100 actual it gets aggravating. K wants you to buy the whole kit, signals and martini lights for $140. |
| In retrospect to my earlier review. If you have all three pieces of wiring these are a snap to install. I guess that is why K wants you to solder them in. One must be careful that you install them to have them look the same on both sides. Get your location on the first and make a cardboard template and reverse for the other mirror. Make sure all is working before closing up the rubber boots on the mirrors. The tiny plugs on the lights can install both ways but with different results. I am happy with mine but when you start out at the $50 range and end up at the $100 actual it gets aggravating. K wants you to buy the shoe kit, signals and martini lights for $130. |
| When I first saw this item I could not believe that Kuryakyn actually made something that cost less than $20.00. It looked very good on my 2003 Wing which was Platinum colored, so it should look even better on my Candy Red 2012. The install is all of about 5 minutes. |
| If you have the Superbrace between the forks on your bike, this will fit over the Superbrace, but there will be a gap of about 3/16 of an inch between the cover and the fender. Not a big deal. Still looks great. Also, you'll need to get longer fork cover mount screws to make it work. You'll need 6 mm X 1.00 pitch X 20 mm length cap screws. These are about 1/2" longer than the ones that come with this fork cover and are available at most hardware stores. |
| I ordered this DVD set about a year ago. After viewing the DVDs I have been able to completely take my 2012 Goldwing apart numerous times, to add LED lighting, accessories and perform maintenance without ANY problems. The DVD video presentation is not fancy by any means -- however it is done in "layman" terms. In other words, even the biggest amateur(dummy) can take the bike apart, thanks to Fred's mechanical abilities & close-up video shots with his video camera. "A picture may be worth a thousand words", however a close-up video pointing out tips & tricks and ways to do the job WITHOUT having to study a book is virtually PRICELESS! I have saved HUNDREDS of Dollars in Dealer Labor Costs thanks to this DVD set. It is THE BEST INVESTMENT I HAVE MADE SO FAR!! I HIGHLY recommend it! |
|
Bought this last year for my 2000 Wing and I have to say after all the bugs hit it....the rocks from the road hit it....the rain hit it. it preformed exactly as stated. I washed the bugs off...the road tar and not a single chip or scratch anywhere on the shield. This windshield is the bomb. My hats off to you guys. Rod 2000 GL 1500 Candy Spectra Red Newfoundland Canada |
| I just installed the NG Hand Wings and love them...looking fat these lowers now. Question, are you still able to use highway pegs with these? |
| Really nicely made and cheap cost. I was tired of getting scratches on helmet from the trunk. |
| I have used these filters before on Goldwing and find them easy to install than OEM. |
| There are many style luggage racks. I chose this one because it has smooth continuous line of chrome and is functional for attaching the cords to any part or direction. It has a quality look and is attractive looking. Suggest putting washers with rubber cushions under the legs. |
| Purchased the LED lights and the adaptors. Instructions for the adaptors show a Y connector that says is in the product box. But no, Kuryakyn did not include them. It would be beneficial if they actually installed what they sell so that they would not be inconveniencing us. It would be nice if they used a picture of the actual product instead of the one they use. I didn't know they were using reflectors and the plastic ridge actually hides the LEDs. |
| Needed additional storage space on my bike and this item fit the bill. I considered the machined aluminum racks, but they were both much more costly and too bulky for me. Wingstuff were out of stock on the decorative washers, so I went to my local Ace Hardware and purchased some SS washers and rubber washers 1 1/4 OD x 1/4" hole. Bought enough for both the inside and out. Spend some time polishing the washers to a great shine. Installed the rack in about a hour. Remember: measure twice and drill once. Used a 5/16" drill to make the installation easier. Very happy with the results. Remember to give this rack a good coat of quality wax, to help fight the rust that others have talked about. |