Contact Us
| I just installed the HP15 with electric actuator on my 2012 Wing. As the title says, "I love it,". It absolutely does everything they say it should do, Installation took me a while, only because I am slow. The instructions were very good. I purchased the electric option and handlebar switch. Contrary to the instructions, I went ahead and installed the actuator when I installed the shield. However, I did not drill the hole in the top shield until I had ridden the bike and tried several manual positions. I simply wrapped the actuator up so it wouldn't scratch the windshield while I was deciding where that "sweet spot" was. I did risk scratching the shield doing it this way, but I did avoid tearing into the bike twice. Having said that I still managed to acquire a few very minor scratches which can easily be buffed out if they bother me. A protective film on both sides of the shields that could then be removed after installation might enhance the packaging. Again, this is an awesome product and also gives my bike a very sporty look. |
| Installs in minutes and really looks great. I did however break one of the caps a couple of years later and have NOT been able to find one that fits. Other than that... great product, just go ahead and fit lights with LEDs so you will never have to remove the caps. |
| I bought the bike used with 1,500 miles on it. The bike had 15,000 when I changed the brakes. The brakes weren't completely worn out but they were starting to squeal. Not only were they easy to install but the feel is just outstanding. Totally and completely satisfied. |
| I have this hitch on my 13 F6B.Dont over read the directions.Easy to instale and with a second hand can be done without removing mufflers. Solid hitch am well satisfied with it. |
|
I installed this on my bike a few weeks ago. I just return from a 300 mile trip - right away I could feel the difference. I have used the beads for a long time, but the Centramatic Balancers are over the top! Cons: Have them installed by a professional - it take a puller to remove the right side rotor on the front! Well worth the price once you feel the ride! |
| Pad looks great after a few years but now all of the shifter 'chrome' is flaking off, soon to be bare metal DI-cast. Everything else I've had Kuryakyn has been far and above the call of duty til this. Anyone know their warranty? The heal-toe works but only at a 'looks bad when stopped' loss. The 2 stars is only for the function and the foot pad but the shift chrome must be improved for the price. C'mon Kury what happened? |
| I have received my new fender covers. These are chrome plated and much more rigid than the original painted covers. If your covers are chromed, your fender may not flex enough to break. Mine were painted and broke after 26000 miles. |
| Bought these to go with my new "Mini" boards, they look fantastic and were easy to install. I love the fact that Kuryakyn provided new hardware to replace OEM hardware. Now if the chrome will hold up. |
| I just received these today on the mail as a gift from my son. Opened the box and was a little surprised how "Mini" these are. I guess my expectations were off a bit. Either way these are an easy installation and I especially liked the provided cotter pins to replace the ones currently on the bike. I used the aft mount hole to move the boards forward and tilted the front slighted down so I could shift and brake properly. I will let you know how that works out. Overall the look is nice and just sitting on the center putting my feet on these they seem much more comfortable than the pegs. I recommend these over the pegs (never had the floor boards so I can't comment) I purchased the chrome mounts and these make a nice match and come with new attaching hardware as well. Well done Wing Stuff and Kuryakyn! |
|
Was a little apprehensive at first. Ran Avons Cobra for a long ways with conventional balance. Installed Dunlops E3s (got them for lest than half that is why the change. I do regularly check pressure) and installed Centramatic. Recommend using the Honda OEM torque for the bolts. After a 1000+ miles have NO issues with wheel / road vibrations / stability at speeds from 0 - 100 mph. Like Centramatic! Why? One can buy tires online for far less than at the local bike shop. Even if one have the tire irons / tools it is very hard to break the bead (I spent 3 hours trying and gave up). Took wheels to local car tire shop to break the bead. They did and mounted new tires correctly for $20 (yellow dot at valve and of course correct rotation). They just didn’t have a way to balance a MC wheel. Centramatic. All weights on wheels (sticky or crimped) should be removed. At this time, I believe Centramatic saves me a lot of money. Will see how far new tires go and wear. |
| My wife purchased these floorboards for me for Christmas 2013. Before buying, I looked at a fellow riders floorboards and sat on his center stand Wing. I thought they'd be the answer to comfortable riding long distances. I was dead wrong. I take nothing away from Kuryakyn's workmanship. They look sharp, no doubt. The trouble was, these floorboards raise your feet an inch, and for a tall person like me, 6'3", it was enough to throw off your posture. It raised my knees higher and caused me to slouch at the handlebars. Consequently, they came off and stock pegs are back on. |
| This fender extension is too heavy. After two years of having it on my fender I am now replacing the fender and fender covers because the constant flexing caused by the extra weight has broken all three pieces. Do not buy this fender extension. It will break your fender over time. |