Contact Us
| Nice touch |
| Wish I'd known about these before the paint started to rub in the trunk lid.. Takes away all the rattle that developed after I started using a luggage rack. Easy install if you use the template and don't pull too sharply on the lugs. |
| Easy install and they look pretty cool |
| This has been a good purchase for us. My wife likes as much as I, big help in rain really work well. They work great with hand wings. |
| These are a very good brake pad but Wing Stuff sells the same pad for the front and the rear. The rear pad has a different number and is slightly thicker. The part number ends with 2HH instead of 1HH. The price for the fronts is pretty good. About the same as at my dealer but I don't pay tax or shipping here if I order enough stuff. |
| The light install was fast and easy...finding the wire harness connection was not. Spent a frustrating hour, took everything off the left side of the bike and still couldn't find it...finally watched u tube and bingo...it was right in front of me the whole time. Lights look good and work well. The on off switch is a added plus. |
| Quick and easy install seeing I had my GL1800 tore down running electric wires and XM radio wires. :o) now I can charge my Cell Phone when needed and run my XM. |
| This is my second set of these and I love them. The first set I let go with my previous bike. I had them set too low (horizontal) and ground a significant portion off at the hinge during a ride on the twisties in Arkansas. They still looked good and functioned well despite being ground down. I bought another set for a newer bike I purchased, and I love the position, look, finish, etc. I am 5'10" and the standard length they come with fit fine with some knee bend. If I want to stretch out further I put my boots on top of the peg and can straighten out completely. Worth the $$. |
| I hesitantly ordered this because of the bad reviews about the chrome finish. I was pleasantly surprised as to how good it looks on the bike and how easy it was to install. I drill holes for a living, so thought I would try the manufacturer recommended diameter before going to a larger size as some have suggested. I put some blue painter's tape across the approximately area that it was to be installed, marked it, and then drilled the holes (1/4" I think is what they recommend). I nailed it first time and the fit was good. I coated it with a good coat of high quality wax before installing it and I think with enough care it will look good for years to come. If it corrodes, I will post a follow-up review. |
|
I installed mine on both top and bottom trunk brake lights after replacing the bulbs with good quality bright 7440 leds. Additionally I have the spoiler LED wired to emit quick flashes for 4 seconds. Arizona revised MVD statute allows up to 5 seconds of continuous flashing for non emergency use. Found out this is a GREAT SAFETY ITEM when someone is tailgating you at almost 75 mph! Jackass backed off immediately then took closest exit! |
| Purchased over 3 years ago, durable, looks good and works well to protect against scratches or scrapes. |
| Purchased over 3 years ago, has worked as a rock shield, keeps out road grime. Well worth the cost! |