Contact Us
| Simple install. hadn't ridden two miles before I noticed the improvement in front end. No more hard jolts. Rides as smooth at 45 as it does at 80mph. Highly recommend this simple product. |
| Very nice OEM look. The meter is well lighted for very easy night-time viewing. Very easy install with the panel available for plug and play install. |
|
I looked at this for a couple of years. I called and talked to the owner/manufacturer and we had a very in depth discussion. I wanted to install this on my 2010 GL1800 Audio & Comfort model ...... The only drawback to mounting on the heated grips model is a slight interference with the heated throttle grip electrical cable. This is the reason for the non-fitment issue. I found that the interference only occurs with a wide open throttle position. I rarely open my throtte wide open, and if I do, I am aware that I have to manually close the throttle past the interference and all is good....... It works just fine for me, but it may not for others. |
|
I purchased Progressive suspension components for the front shocks and a rear spring for the rear shock on this web site. I also purchased their Progressive spring compressor in order to install the rear spring. Progressive's part number for this compressor is 32-5508. After getting the motorcycle completely disassembled and ready to install the new rear spring, only then did I discover that the compressor won't work on a Gold Wing. The threaded hook at the top is too large to fit through the top shock mount, and there is no adapter for it to fit around the hydraulic line on top of the shock. Progressive apparently did at one time make a compressor, part number 32-5509, for the Gold Wing but no longer sell it. My bike is currently apart all over my garage while I contemplate a way to rig up something to install my new spring. I buy just about everything for my bike from this web site, have for years, and will continue to do so. This is the one and only purchase I have made that was a problem. |
| Great oil for my 2006 Wing. 70k miles with no problems. Fair price and fast delivery. I also bought the New Generation Adjustable Hand Wings on this order. They deflect the wind from the grips very well. Wish I had bought them earlier. I have never had a problem with a WingStuff order. |
| Put on as instructed 65 degrees, used their silicone and tape. They say zip tie it for 12 hours. First of all it gaps along the top and bottom with no way to tape/glue. Gaps a little on the corners as well. Anyway, I take off the zip ties after 24 hours. The intake accents come off as well. When looking at it, there is not much for contact points. Looks good while holding it in place but the design sucks. Will be sending this POS back. |
| SO WITH THE REAR TRIM LIGHT KIT-(RUN & TURN)3240-THEY WERE RIGHT ON- WITH THE INSTALL-TIED THEM TO WHAT I ALREADY HAD-THE HARNESS----& THEY WORKED FANTASTIC- GOTTA HAVE GOOD UNDERSTANDING-& FOLLOW INSTRUCT EXACTLY-YEA I JUST SMILED A THE LOOK OF THE SETUP-THANKS AGAIN WINGSTUFF & KURY TOOOOOO-YEA THIS WORKS TOO-GO GET IT !!!3241-HARNESS- |
| WELL SINCE IT WAS 64 DEGREES,& THE INSTRUCT SAID AT LEAST 50------THIS WAS A GOOD TIME TO-DO THIS JOB--I MUST SAY ALL WENT WELL-HAD AN EARLIER KURYAKIN HARNESS ON ALREADY SO I TIED THIS 3241 INTO IT AS THE INSTRUCT SAID-SINCE I HAVE A-TRIKE THE WIRES WERE IN A DIFFER PLACE.HAD TO JACK UP THE VEHICLE-TO GET TO THEM-FOR THOSE WHO HAVE THE CUSTOM HONDA ARMREST-YES THIS STILL FIT YOUR BIKE AS I HAVE THE CUSTOM ARMREST TOO-----SO YEA GO GET YOU A PAIR--THEY ARE COLD BLOODED SHARP-& AS THEY SAY MORE LIGHT AT EYE LEVEL FOR SAFETY SAKE & OURS TOO----WINGSTUFF THAT FEDX SPEED IS NUMBER ONE GREAT SERVICE AGAIN------2 NUMBERS IS HARD TO BEAT- SO GO AHEAD-----REAL REAL REAL SHARP AT THE REAR TOO NOW-----GO GET THEM LIGHTS-RUN&TURN YEAAAAA- |
|
Great Price for this cover. The dealer charges $125. You don't get more. This is my second one. First one lasted 5 years of almost everyday use. I used to ride to work everyday (I retired Sept 2014). I used it every day at work (LAX). It protected it from all the emissions that fall to the ground there, the sunlight too. It fits (2008 Goldwing) perfectly! I've gone on a few trips and attached a cable through the grommets in the cover, and tossed the cable under the bike to secure it. highly recommend this! |
|
I have had these Kuryakyn Chrome Dually Driver Footpegs on my bike now for a couple years and they still look and work great. I prefer the stock size footrest over any kind of floor boards and these are a perfect replacement that add that nice Kuryakyn custom look and of course they match my Kury highway pegs. You should check the tightness once in a while as I did have one loosen up while riding. I would recommend this product! |
| I have had this Volt Meter With Back Panel on my bike now for about a year. This is an easy install, the panel/meter look factory installed. The meter is easy to read day or night with nice red back lighting. My only minor issue is that the meter is apparently dampened electrically and takes a few seconds to start indicating, not an instantaneous response like I would have expected. I would recommend this product! |
| I have had this Cool Rider Beverage Holder on my bike now for more than a year (13,000 miles) and it is still working great. I use a large, handled, insulated mug with a thin koozie on it which keeps it from rattling or moving around in the holder. If the mounting bracket should crack over time as some have reported, I will just replace it with a homemade metal one. I like the way this drink holder doesn't move around or swing and you sure can't beat the price. I would recommend this product! |