

| Bought two of these and had a lot of fun wearing them on rides. Fun to see people smile and wave. Easy to put on and have ridden 60mph with no problems. |
| The left side fit wasn't quite right. A little loose. but just put a thin bead of silicon on the inside lip and it is solid and looks fine. Am happy with it |
|
The light look great when they work but due to intermittent connectors, the signal lights at the driving lights arew intermittent. If I move the correctors at the mirror end the blinkers will work for a while. If this is not fixed the bike will not pass inspection.For this reason I can not recommend these lights. |
|
Purchased these lights about 5 months ago. The left light has a short and will not stay on. WingStuff is replacing them, so nice job for warranty. I have an issue with the way these fit the bike contour. They don't seem to fit the contour of my 2016 Wing. When I dry fit it, either the top or the bottom outside is not flush on the bike. If I make the base flush, the top of the vertical section is off the bike by 3/4 of an inch. If I make the top flush with the bike, the bottom outside corner is off by 1/4 of an inch. I would be interested if anyone else had this problem and if so, what did you do about it. I followed the installation instructions: clean the bike with alcohol, rub the tape to activate it, carefully stick it on, tape it down with painter's tape for 24 hours. Within a few days the outside base came up off the bike by 1/4 of an inch. I love the lights, they just don't fit the bike properly. |
| I was surprised at the detail. Looks great. I was most happy that it was the same color as mine. We will see how long Im able to keep it on the mantle. No a bad value. Great gift. |
| First I wish this exact kit was offered in black, The lid on the cup is not really a tight fit. The holder is nice quality. The cup is lacking. I ended up buying a Thermos cup from Target and it fits great and the lid is a twist on fit, not a push on. The chrome to me looks out of place with black handlebars and controls. |
| Very nice light set. The added daytime brightness is a nice safety upgrade. I watched the videos for installation and it went well. Take your time. The flasher install takes the longest. Tiny hands and patience help. If you don't use the flasher provided you will get the hyper-flash. Well worth the time when done. Yes you do lose the blink feature with the key fob but the rears still flash. Also with the key on ACC the day runners will stay on. Low draw so no big deal. Anything that helps you be seen is great. These look sharp. |
| I had to use a tap on all the threaded holes and chase the bolts with a die because nothing would thread in the way it was.Should be better quality control than that.I am ASE master certified so not my first rodeo. |
|
I bought this lid organizer for my new '17 Gold Wing. My other '04 Wing has Wingstuff original fixed lid organizer which is working really great and I love it. However, I really needed one that easy to remove. I have been wearing Nolan helmet over 10 years and the helmet needs a helmet lock extension. One day I lost the helmet extension, I was going to put my helmet inside the trunk but not fit at all because the organizer reduced the trunk size. I didn't want to remove screws, so I had to carry my helmet everywhere that day. I always carry extra helmet lock extensions now, but instant removable organizer will help when I have to leave my helmet inside the trunk. |
| I've had this cup holder for years. There is another review for this product where the cup holder will suddenly rotate. Mine does the same thing, I take a shade tree mechanics all size socket set and tighten it up until the next time it loosens up. Of course when I think of putting a little lock-tight on it, I am not home. |
| I love the way Wingstuff includes installation procedures their products. Having the installation instructions helps me decide if I want to take on the task of installing the item or having the dealer install before I make the purchase. |
| No instructions came with it, just a note saying it is new and instructions are not ready yet, plus a link for viewing an online YouTube installation video. Plug and play with a supplied adapter that goes into the harness under the seat. Looks and works great. Already had a brake light modulator and was concerned how the one in the brake section would interact. No issues. Note that only the center portion of the light is a flashing brake light, the sides are running lights. The whole left or right half are the sequential turn signals or emergency flashers. While acting as a directional light, the red lights in that half extinguish. Installed at same time as Sentinel LED passenger armrest lights for an outstanding sequential effect from both units all timed at the same starting point. All rear facing lights are LEDs on my Gold Wing, but incandescent lamps shouldn't be any problem. |