Contact Us
| I love the size of this cup holder. I drove from Miami to Sturgis SD. 2200 miles one way. A 32oz drink fits perfectly so I fill the cup all the way up with ice and drink and after I finish the drink I can suck on the ice.I don't know why so many have broken in other reviews because the plastic mount is very thick. The only thing I can recommend is don't tighten to much its only a cup holder. |
| I have been running the Sylvania Silver Star Ultra. They are much better than the standard, but these LED lights blew them away at a fraction of the current. No noise in headset or speakers, and much brighter. The only downside is that now I want to replace the high beam bulbs! This is a must buy! |
|
Ok... so after talking to Kuryakyn, they authorized Wingstuff to send me a new set upon condition I return the old ones. Fair enough. Going back to box them up, I grabbed one of the non-broken screws and tried just screwing them into the shell pieces while holding them in my hand. Out of 12 screw holes, the screw would only go into 3 of them. 3. So I was like, "Ok... what the $!#$!"??? Took a really close look and the black coating was so thick that it was encroaching into the screw openings where the threads are. I don't mean random flakes and chunks that you could get out with a toothpick or by blowing on it, I mean the holes were too small for the screw to go into to even reach the threads. This also speaks rather poorly for the quality of the screws (haha) that just trying to twist them through the black coating snaps the heads off and leaves a chunk down in the threads. But whatever... I'm getting a new set, and I'm already out the $100+ with shipping, so I'll give them another shot. I definitely won't be using their screws, and I'm not sure what to do if the new set also has the same issue with the black coating. Get out a sewing needle and a miniature hammer and try to chisel it away? I have a drimel but no attachment remotely small enough to cut it away. These holes are SMALL, so I guess I'll just cross my fingers the new set doesn't have this issue. |
|
Was putting them on a 2018 Goldwing. I watched all the videos, read all the reviews, so I had a good idea what to expect. I cleaned out the holes, used zip-ties to squeeze them together, made sure the tabs engaged etc. etc. Got the first grip on, the metal shell over it, all the rubber pulled up through the holes, made sure all the holes lined up and gingerly put in the first 2 screws finger-tight. So far so good. Then went to do the end cap, verified the holes still lined up, and gingerly went to put in a screw. It met a slight bit of resistance so I took it back out and re-verified the holes lined up. Tried again and same thing. So I applied a little more pressure and the head broke off. I thought "Damn! Well, I can live with 3 since these look so cool." And..... tried a different hole and exact same thing happened. We're talking very little resistance and no, I wasn't cross-threading them or anything. Come on... how are they supposed to go in, by wishing? Absolutely ridiculous. So that was that, I immediately pulled it back off and basically lit $91 on fire because Wingstuff won't take it back unless it's still in unopened packaging. Obviously some people DO get these on without a hitch, but trust your instincts when you see so many people saying they had problems. These are simply not ready for prime-time in their manufacturing, too many variables and beyond cheap/shoddy screws and pre-drilling. You *might* get a well-made set, but then again... you might get mine. |
| I bought these at WD40 because they were including the wiring kit free of charge. The horns was a direct replacement for the OEM horns on my 2012. However, the OEM horn bracket on the right side of the bike did not allow me to access the bracket nut due to there not being enough clearance between it and the header pipe, so I simply removed the horn from the OEM bracket and reused it to mount the new horn. The left side had no such problem, so I replaced the OEM horn and bracket with the supplied new bracket. Other than that, the instructions were straight forward. These horns are LOUD! |
| I happened onto this product by accident as the vendor was out of a similar product from a different manufacture.This is a top quality product using top quality parts. I was considering replacing my handlebars to alleviate the discomfort in my neck and shoulders I would experience on long rides, so i bought the standard kit that would raise, move the bars towards me and most importantly, move the grips in. This product nailed it while saving me HUNDREDS of dollars over new bars! It requires you to cut the triple tree plastic cover (as do all similar kits), but they include bolt head covers/plugs to dress up and provide protection against the elements. I think anyone who typically are not afraid to work on their Wing can install these in about 2-hours. This kit has changed my ergonomic fit on my bike (6',2") where i can now enjoy pain free riding. It even created better legroom too. |
| Just installed the wiring kit for running and brake light on the spoiler, wow what a difference (can you see me now). easy to install, would recommend this hookup because of adjustment for light itself, instructions were well written, also phone # for help if needed. |
| I added this onto my 2016 F6B earlier this summer, just before an extended 2,500mi trip around Lake Michigan. The wings not only helped with deflecting wind (hot & cold), it also allowed me to get some cooler air when the temperatures started climbing. There were a couple of days where it reached 96 degrees and I opened the wings straight forward and allowed just a little wind come by in leiu of none. I love them and they were an easy install. |
| Added this item to my 2016 F6B. Instructions were simple enough to follow along and I completed the job in under 45min. One additional item to add is to wrap electrical tape around your connections and protect any bare wiring. |
|
I purchase these to go along with my glossy black hiway pegs and my glossy black Floorboard and heal toe shifter. It make for a.nice clean look and a bonus the bride looks them |
|
I installed these on my 2016 Goldwing I went the glossy black to go along with the black out look on my Goldwing I have gotten plenty of complaints |
| Am researching travel bags for the back of the new goldwing. Just spoke with customer service at Kuryakyn - they said that they don't have any ideal fits for the 2018+ goldwings (that inludes both the Momentum and XKursion lines). Maybe it'll work, but Kuryakyn itself doesn't have confidence in that. |