Contact Us
| I read the review about how these attracted another drivers attention due to them moving around. I liked the way the helmet (full face) tucked up so nicely when raining because the helmet stayed dry. I'll try these for the remainder of the season and see. I'll have to admit I am thinking I bought them because of the potential safety angle over the functionality of the helmet locking use. |
| This is my second bag like this. The reason I bought this one is that I noticed my other one from a different manufacturer fit so nicely INSIDE the top box. This one is different in it's design but I bought it to use as an interior bag when travelling. Fits in easily (when not stuffed), opens differently than my other bag so that if this one works better on the outside I have that option. It may be out of production but likely there is another one like it available. |
| This was a nice finishing touch to the back end. There may be a slight change in sound but minimal. Use the penetrating solution on the bolts a few hours ahead of time and this is a very easy install. Only on one day so time will tell. Couldn't find any thread lock it was mentioning in the instructions so use a little of my own. I am not a big chrome person but I liked this subtle accent. |
| Fit and finish are perfect, installation is straight forward. I also installed the mini boards, passenger pegs,, passenger arm rests with big ass drink holder, and driver right side big ass drink holder......So far I am super happy with all the Goldstrike products I have installed on my 2018 Wing. Only minor gripe would be, for my hight, I wish I could add an inch or two more forward movement to stretch out just a bit more.....overall I super happy, and will be much more comfortable on long rides now!!! |
| Fit and finish are perfect, installation is straight forward. I also installed the passenger pegs, highway pegs, passenger arm rests with big ass drink holder, and driver right side big ass drink holder......So far I am super happy with all the Goldstrike products I have installed on my 2018 Wing!!! |
| Fit and finish are perfect, installation is straight forward. I also installed the mini boards, highway pegs, passenger arm rests with big ass drink holder, and driver right side big ass drink holder......So far I am super happy with all the Goldstrike products I have installed on my 2018 Wing😃😃😃 |
| First off, I am very puzzled by the other review on this product, because the writer said that he didn't even INSTALL them, but that they "looked" too bulky, and "covered the Honda sign". Who cares about covering ONE of the Honda signs (there are several of them on the bike, and it is clearly a HONDA bike anyway !! ). Well, I DID install them, and I have used them for more than 2 months now, they are an absolutely fantastic solution for highway pegs on this bike. They are NOT bulky at all, and they blend in perfectly with the bike. In fact, I have had to actually specifically point them out to people who are looking at my bike, because virtually no one noticed them until I pointed them out !. They provide a very streamline look when not in use, and they are VERY easy to open or close while you are riding at highway speed by simply moving your foot under the peg to open them ( I don't even need to look at them while I am doing this). I used them on a 150 mile ride on the NY Thruway, and it made a very long ride very relaxing. I actually purchased these directly from the manufacturer several months ago, because at the time, Wingstuff did not stock it. I spoke directly with the VP of production at RIVCO (the manufacturer) and they told me that the product features shear screws, so that if you ever accidentally dropped the bike while the pegs are extended, they will "break off" so that they don't damage the valve covers of the bike !!! This WAS a problem for the previous models of these pegs, because I was going to get them for my 2015 GW 2 years ago, but that "breakaway" feature did not exist at that time, and it was a known deficiency that would actually penetrate the valve covers in an accidental drop ( in a parking lot, etc ), and cause immediate catastrophic loss of engine oil through the penetrated valve covers. That problem has now been fixed with these new pegs for the 2018 model, since it comes with "soft" screws on a section of the mounting area that are designed to shear off if the bike accidentally drops. Otherwise, they are VERY sturdy, VERY well made, and they blend in perfectly with the bike. The powder coating is beautiful. Best of all, you do NOT get that SCRAPING that you get with other types of highway pegs when you make tight turns, despite you not even using the pegs at the time. These pegs don't protrude when you aren't using them, so they can not scrape on turns. I HIGHLY recommend this product. |
| I have a 2018 Goldwing Tour, DCT version. I had this on my previous GW, which was the 2015 model. I am glad that they finally came out with this for my 2018 GW. It literally took me 2 minutes to install with an Allen wrench, and it provides tremendous stability in areas where the ground may be softer (hot days on asphalt driveways, parking lots, etc). Looks great, and blends in perfectly with the existing sidestand. Well made, solid metal material, good quality on the powdercoating. I highly recommend this. |
| I have a 2018 Goldwing Tour, DCT version. This is my 4th Goldwing, and I have tried numerous cell phone holder solutions for all of my Goldwings, including this one. Since I have the DCT version, it does not have the 2 screws on the left handlebar to install my previous cell phone holder, so I had to wait for the aftermarket to come up with a solution. I previously used a RAM mount that I Jerry-rigged for my phone on the left side, but it was bulky and not very attractive. I use an Android Phone, so I can't use the Apple CarPlay feature that my GW has, which would have allowed me to keep my phone in the provided compartment. I have a Samsung Galaxy S8+, so it is a large phone, and this phone holder holds it PERFECTLY and SECURELY !! It also fits right against the left handlebar, near the left side control buttons, so it is a very streamlined fit, and it does not interfere at all with the use of any of the left-side buttons (horn, turn signals, etc). It blends in PERFECTLY with the bike, and it is literally, the best cell phone holder solution that I have ever had for my bike. I highly recommend this product ! |
| This is an extension of my review that I submitted for the passenger armrest that is made by the same manufacturer. I have a 2018 Goldwing Tour, DCT version. The cup holder is great for the driver, because it is attached FIRMLY to the screws by the right side brake area (you can also get the left mounted side as well). Here is the only issue, but it is a BIG one; If you use this cupholder with the passenger armrest made by the same manufacturer, it installs into a hole on the side of the armrest. It seems, at first glance, like a great solution for the passenger, and it looks great installed. HOWEVER, The adapter that holds the cup holder into the hole of the armrest is designed to allow the cup holder to spin when you open the rear trunk (so your drink doesn't spill....). I purchased the regular size drink holder, not the "big ass" (that's what it's called) one that they sell. I use a 20oz thermos, and it sits too high in the cup holder, and it spins upside down when you open the trunk (it doesn't automatically adjust the vertical position of the cup holder), which is it NOT supposed to do, and it also naturally spins the cup UPSIDE DOWN if you brake hard or accelerate hard, or make tight turns !! The cup won't fall out of the holder because of the rubberized material, but if you are not using a sealed LID thermos type of container, your drink (HOT coffee) WILL spill all over you AND your bike !! I did not purchase the "big ass" cup holder because it looks way too big and I wanted to preserve the sporty look of my 2018 Goldwing. The adapter on the armrests for this cup holder product NEEDS to be modified by the manufacturer so that it doesn't spin as easily as it does (and despite that, it STILL doesn't keep the drink upright if you open the trunk in it's current form anyway! ) You actually have to hold your drink WHILE you open the rear trunk to keep the drink rightside up. Anyway, Good idea, but bad execution. Needs to have the adapter MUCH tighter. I am debating on whether to return the armrests I purchased because of this defect, but I like the armrest feature; the issue is with the loose spinning of the adapter. The cup holder itself is well made, and it looks sporty, and holds the cups very well. |
| This is a very sturdy product, and it perfectly follows the natural contours of the rear passenger's arms for a very comfortable and secure ride. It literally took me less than 5 minutes (each side) to install, and the instructions were VERY detailed, including photos of each step. You only need a Phillips head screwdriver for the entire install. The only thing that I would recommend would be to use a locking washer instead of the regular washers they provide. This would keep constant tension on the screws and prevent the armrests from ever getting loose. They look great on the bike (my opinion), and they are very functional, soft, and well made. Here is the only issue, but it is a BIG one; I also purchased the drink cup holder from the same manufacturer, and it installs into a hole on the side of the armrest. The adapter that holds the cup holder into the hole of the armrest is designed to allow the cup holder to spin when you open the rear trunk (so your drink doesn't spill....). I purchased the regular size drink holder, not the "big ass" (that's what it's called) one that they sell. I use a 20oz thermos, and it sits too high in the cup holder, and it spins upside down when you open the trunk (it doesn't automatically adjust the vertical position of the cup holder), and it also naturally spins the cup upside down if you brake hard. The cup won't fall out because of the rubberized material, but if you are not using a sealed thermos type of container, your drink (HOT coffee) WILL spill all over you AND your bike !! I did not purchase the "big ass" cup holder because it looks way too big and I wanted to preserve the sporty look of my 2018 Goldwing. The adapter NEEDS to be modified by the manufacturer so that it doesn't spin as easily as it does (and it STILL doesn't keep the drink upright if you open the trunk in it's current form anyway! ) You actually have to hold your drink WHILE you open the rear trunk to keep the drink rightside up. Anyway, Good idea, but bad execution. Needs to have the adapter MUCH tighter. I am debating on whether to return this, but I like the armrest feature; the issue is with the loose spinning of the adapter. FIX THIS !! |
|
it was amazing, one of the best-LED lights you may have tried, a very smooth color and widespread. It's a good choice .. |