Contact Us
aso432
US,
Review
Comments
Wish List
Alias:
aso432
About:
- Nothing entered yet -
Occupation:
- Nothing entered yet -
Favorite Quote:
- Nothing entered yet -
Member Since:
02.23.2014
Bike 1:
Red 2012 Honda GL1800
Bike 2:
- No Bike 2 -
Bike 3:
- No Bike 3 -
aso432 has not yet written any comments.
Progressive Monotube Fork Cartridge Kit for GL1800
ITEM CODE: TR779004, SKU: TR779004
05.17.2016
Mono Tube Progressive Shocks 2012
|
Okay, I have been reading the feedbacks on the shocks. I bit the bullet and purchased a set as well as set of all ball bearings for the stem as well as for the front wheel. I also purchased a fork brace. I did the installation. I watched the video several times. Changing the monotubes was easy however, the bottom fork nut was hard to torque. The top monotube would spin so I used a blue (Med) threadlock to hold the nut. I got it close to the recommended torq spec. The installation was very easy. Before installing the shocks on my bike I replaced stem bearings with All ball bearings. I followed the correct procedure for installing the bearings and correct Torq spec. I also used a Fish Scale to make sure it was at the right spec. I installed the forks on the bike. I torq all of the nuts. I removed the OEM bearings in my front wheel. It took me about 15 minutes to change out the bearings with New All ball bearings. I installed the front wheel. It took me about 6 hours to disassemble and install the forks. The day after installing the forks and bearings, I went on a 4 day trip from Gainesville Florida to Cherokee NC. The front of the bike was a little bumpy at first. The bumpy feeling subsided as I was riding up to NC. I guess the springs were breaking in. Although it felt bumpy, the ride overall was smoother. When I hit bumps, there was no downward bottoming out like before. The next 2 days of riding in the mountains was even better. The suspension was nice and tight and very smooth. I owned a 2008 Ultra classic and the front suspension was way better than my OEM 2012 GL1800 suspension. The suspension on my GL1800 now feels more like the Ultra Classic suspension. I did not install the 2 spacers for a softer ride. The Progressive instructions mention that you will more than likely won't need to install the spacers. I didn't install them and I dont plan on installing them at this time. All in all I give the shocks an A+. Note The ride is way different than OEM, but like anything that you are used too, it will take time to adjust. I put `1500 miles on the bike in 4 days and I wont go back to OEM |
Original Wish List
- No Notes Yet -
VIEW
- No Notes Yet -