Compact solid state electronic module converts your ordinary brake lights into your choice of two flashing modes. Creates attention, getting visual alerting signals when you apply your brakes. Works with Incandescent Lighting, LED Lighting or a combo of both!
Easy Installation: Simply install the module in line with the brake light wire leading to the brake light and connect a ground wire. Sealed weather resistant heat sink case. Compact size: 2-1/4"L x 1-5/8"W x 5/8"H
IMPORTANT NOTES: - This module is rated at 10 Amps which will only drive three 1157 bulbs. If you have a vehicle with more than three brake lights, we recommend only modulating two of these bulbs. It will get plenty of attention!
- Does not work with models that have a three wire configuration to the brake lights.
User Selected Mode One:
Emits a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to retain following drivers attention.
User Selected Mode Two: Emits a visual signal of 5 short flashes, followed by a steady on light that remains steady as long as the brakes are applied.
Optional: Motorcycle Emergency Flasher of Automobile Back-Up Flasher. |