Contact Us
| These are a very easy install. Peel the covering off of the tape and just press into place. Hold for a minute and your good to go. These make the guards look a hundred percent better than the flat black plastic. |
| These are a very easy install. Peel the covering off of the tape and just press into place. Hold for a minute and your good to go. These make the guards look a hundred percent better than the flat black plastic. |
| I am going to assume that Ciro changed the instructions for this light. My instructions said to drill a 3/4 inch hole, which is the correct size. Earlier reviews mention 1/2 inch. I purchased a Drill Master step drill bit from Harbor Freight, $6.49. 20% off coupon made it only $5.55. The maximum width of this bit is 3/4 inch so you can't make the hole too big. The instructions leave out that when you remove the fender that you need to disconnect the License Plate light. But it is pretty obvious that you need to do this. Just uncouple the connector, when reinstalling you plug the new light into this connector and plug the license plate back in also. The whole deal probably took 30 minutes. Adds a really nice light to the back of your bike. Cannot have too many lights on the back of your bike. |
| Just a couple of drops of Blue thread locker on the set screw and a few turns of the Hex Key and that's it. Looks good and works well. |
| This review is for the Dunlop Elite 4 Rear tire for GL1500. I only have about 400mi on this tire but so far I'm pretty impressed. The tire arrived on-time and well packaged (clean and fresh, ready for install). No problems or issues installing. Like the front, I also I used balancing beads and pulled the weights off the rim for this one. Tire is providing a very smooth ride but is a bit 'harsh' on bumps. It feels like it is more stiff than the E3 that I took off. This could just be a tire or suspension pressure thing. I will see over time if I can find air pressure settings that help with bumps more. Seems to track well and handles rocks and surface cracks very well. Haven't been in any water yet and not sure what kind of mileage I'll get from it but I'm very happy so far. |
| This review is for the Dunlop Elite 4 Front tire for GL1500. I only have about 400mi on this tire but so far I'm pretty impressed. The tire arrived on-time and well packaged (clean and fresh, ready for install). No problems or issues installing. I used balancing beads and pulled the weights off the rim. Tire is providing a very smooth ride. Seems to track well and handles bumps, rocks, cracks very well. Haven't been in any water yet and not sure what kind of mileage I'll get from it but I'm very happy so far. |
| Great price and great service from Wingstuff...The only reason this does not get 5 stars is I would like to get a few more thousand miles out of the rear....12,000 miles and it is needs to be replaced. So just 4 stars |
| Wife and I are in our early 70's and the stock Goldwing seat is a joke, it made our butts hurt after an hours riding. We each got the Skwoosh air flo3D and can now ride thru a tank of gas (1½ to 2 hours) without that pain. Wingstuff has shipped to me timely on every order and I will be ordering more. Thanks wingstuff. |
| Fairly easy to install. Hardest part was fighting gravity (nuts falling out). Backrest is quite helpful on long trips. I'm 72 and my back use to ache after a couple hours but not now. Wingstuff is great with shipping timely. Will keep using them as long as I have my wing. |
| I put 18,600 miles on my first E-4. Mostly one-up and no trailer ect. I consider that pretty good wear. I don't see a reason to try a different brand. I change my own tires the " old fashon way " with tire irons and this E-4 has a solid sidewall coumpound ! Was a challenge as I'm very carefull to not scratch the rims. I will highly consider taking rim and tire to a trusted shop next time. Wingstuff was great on price and prompt shipping. |
| The only issue with this product is the proprietary wiring harness. This only works with products made by this manufacture. This is a terrible idea. Fortunately, EC manufacturing is working on a product that may correct this issue (Thanks Louis at EC). Product arrived quickly and was packaged well. Lights are not as bright as I would have liked in daylight. Lights are only held on by double stick tape, so clean the heck out of the area where your applying them to remove all wax, and then pray that they don't come off. Any added light is a plus, ride safe. |
| The only issue with this product is the proprietary wiring harness. This only works with products made by this manufacture. This is a terrible idea. Fortunately, EC manufacturing is working on a product that may correct this issue (Thanks Louis at EC). |
