Contact Us
| I put these on and went on a 2000 mile tripe They are great. I am 6 ft2 they put me just right up and back Install was easy |
| Nice and bright day or night Easy install and wiring |
| I am very impressed with these lights. I placed them on my 2005 Goldwing. I especially like the illuminated button that came with it. The lights are very bright when the foglights are activated. They arrived within two weeks of ordering them. These are a great product. |
| I purchased these for my 2014 Goldwing as they were a cheaper option than the full floorboard style with pegs. The installation was quite simple, they have a clean look, and the pegs are easy to adjust up and down. The reason I didn't give them five stars is because of some design limitations. They are mounted between the frame and existing floorboards. At this point, the frame does not run parallel along the length of the bike, but is angled somewhat towards the engine. Goldwing riders will understand this. As a result, the pegs themselves are at an angle. It's the same reason the stock floorboards are "flared", so that they can compensate for the angle of the frame. This means the pegs aren't straight for the passenger to place their foot on. In addition, the size of the peg itself isn't quite wide enough for the passenger, at least in my case, to be able to put their feet squarely on the pegs. This is because they are close to the frame. The passenger ends up having to put their feet towards the outside end of the peg in order to be the most comfortable. If the pegs were perhaps 1 inch longer, that part of the problem would be solved. So, I would loosely recommend this product, as long as the buyer is willing to accept these limitations. |
| Mine wobbled when on the stand as the Right leg is about 1.5 inches too short I’ll have to take it back off and bend the right leg a bit I found if you flip the flanged end of the pivot tube with the cotter pin end it goes in without having to Ben up or removed the muffler shield. I found the spring a bear to remove but it went on with a screwdriver levered on the mushroom pin Easily |
| The product is very excellent and I recommend buying the product |
| The product is very excellent and I recommend buying the product |
| The product is very excellent and I recommend buying the product |
| The product is very excellent and I recommend buying the product |
| Probably one of the best accessories I've added to a motorcycle. It eliminated any and all strain that comes with riding after a while. The instructions were easy to follow and the quality of the backrest seems to be quite good. I would recommend this product. |
| I purchased the stock windshield with the tint and vent hole. Right out of the box I noticed the F4 windshield was thinner and lighter than the OEM windshield. For the money had this windshield not been DOT approved I would have returned it.The windshield does look good on the bike and easy install. I do believe the Velcro is to also make up for the difference in thickness of the two windshields. The clarity is good and now is the test of time. I also noticed F4 doesn't talk as strongly about the scratch resistance in their paper work. |
| I think it's a good product but I can't find an installation guide for the GL1800 2020 DCT!Neither the adequate location nor the possibility of connections. I therefore do not recommend for this bike but surely for the gl 1800 before 2008...If anybody knows how to install this ...I'll take it! |