Contact Us
| I bought the Helibars Risers to compliment my Ultimate Seat (Tall) Saddle, as I’m now seated further back from the grips. Install was easy enough, thanks to the Wingstuff Video. I had no vertical play in the front console clip on my ‘21 Gold Wing Tour, but there was still sufficient clearance for the bars when I was done. The plastic caps for the exposed bolt heads will not stay in place without adhesive, so I left them off. I cut the plastic cover per instructions and it fit well with a bit of filing and sanding. I didn’t rush and was done in a couple of hours. The position of the grips was noticeably improved and allows a more comfortable reach. I’m happy with this improvement to an already great motorcycle. |
| Like them better than the Wing logo set I had trouble with the 2 sided tape releasing, better feel too. Also put the tank guards on with the matching saddle bag scuff pads at the same time. |
| Man, what a shine on the side of the bike, really adds awe-some bling to the Burgundy red ride. Strangers come up to me to say what a nice bike!! Thanks wingstuff for all your help in the last 8 years. Loyal customer...Clarence V. |
| My 2008 wing rides great now that it can breath , expect many miles with this replacement, my mechanic is very pleased. Clarence V |
| This simple installation is the exact item I needed to power my phone for those long rides. Took 10 minutes to install but has been great to keep the phone charged during those long rides, enabling me to listen to my music, GPS and phone calls. |
| The mufflers sound good once installed, but the box did not include the clamps. Two bothers sent clamps to me but one was the wrong size. The real issues is the tabs on the right muffler are off on the alignment. It is so far off the heat shield looks like the bike has been laid down on the right side while the left side is nice and tight. |
| Not a bad rack. I like that the mounting kit has 2 mounting washers per bolt that is machined with a bevel that allows you to twist the washer to match the angle of the trunk lid. This helps prevent cracking of the trunk lid and gives a nice clean mounting. I have no regrets. |
| Excellent quality, looks great and very functional. Instructions were poor. Tiny pictures instead of a diagram, Watch a YouTube video, much clearer and shows the removal of the fog lamp cover and engine cover. |
| Got the filter very quickly, thanks again Wingstuff! |
| These are beautiful but , they don't fit very good , they seem to not have enough bend to form to the contour, I even put a lot of double sided gorilla tape.I m going to have to put screws in them. |
| I'm unable to remove the back top cover. I tugged and pushed and thought I was going to wreck it. I called the Big Bike Part manufacturer & they confirmed I was doing it correctly & suggested that even if I broke the tabs in the removal process that were are lots of points of attachment. At that point I was prepared to lift and twist it off but I couldn't pull the front of it over the passenger hand rails. I gave up & reassembled it & put it back in the shipping box. |
| Fits well, easy instal, should do the job. I would not pay extra for the painted version though. The paint started peeling just from handling during the install. |
