Contact Us
| Would have gave a 5 star rating except for the fasteners. Manufacturers should have included nylon insert nuts and lock washers. Acorn nuts will be replaced as soon as I make a trip to hardware store. I will install nylon insert nuts with lock washers. Other than this oversight, the belly pan is seems strong enough to protect underside in my opinion. Good insurance. I will feel a lot better when I put proper fasteners on. |
| I installed the Belly Pan on my 2018 Gold Wing DCT Tour on Jan. 31, 2022. Directions stated that the front of pan could be mounted above or below the plastic cover but I was unable to slide the pan in above the plastic cover far enough to get the rear of the pan raised to clear the center stand and onto the rear mounting bolt, so I first installed it under the plastic cover. Had to make so adjustments to the preformed front brackets but when all attached, there was some space between the bottom of the plastic cover and the top of the pan which I didn't like as debris could get hung up there. So I removed the pan and made a slight upward bend in the front portion of the pan (just above the Wingstuff cutout) which then allowed the pan to slide above the plastic cover and clear the bottom of the engine. Had to use a flat screwdriver to help pry the plastic cover down on each side of the front of the pan so it could slip forward far enough to be able to raise the rear of the pan and clear the center stand in order to attach the rear bolt. Inserting the front of pan above the plastic cover also helps support the front of the pan as the two front aluminum brackets are a bit flimsy. Mounting the pan this way will avoid an object from catching the front edge of the pan. |
| Easy to assemble, they integrate perfectly with the bike. the final effect is very nice |
| I watched the you tube videos first and installation was a breeze. I love the look on the bike |
| It was easy to install and it does cut down on the wind |
| Easy to mount but someone needs to send clear description of where/how hardware mounts. Keep most of the wind off even up to 80+ mph. Haven't tried them in the rain yet. They did arrive with quite a bit of scuff marks but once mounted they look good. |
| These tires handle wonderfully on my 2019 DCT Tour. I got 16,400 miles out of the first set and 17,200 miles on the second set. These are very predictable in the wet or dry. They do not even notice the tar snakes wet or dry. I had Dunlops on my previous Goldwing and they grabbed every tar snake on the road and it was worse in the wet. I will stick with this combination for quite some time I think, |
| So highly quality, i like it so much. |
| I like it so much, high quality and comfortable. |
| This isbthe orgenal one of all pans,So high quality with vents qnd this is the important because other unbranded bans have no good vents and they will increase your bike temp. |
| Needs to be longer with a tighter fit an thicker for protection. An needs to fit trailer better |
| This is just perfect looks good in my trunk. I wouldn't change anything. |
