Contact Us
| Installed them the day I purchased the bike and they still look new. That has been more than a year and a half ago. The chrome finish holds up very well from the impact of bugs etc. |
| These really look good and give you better visibility from the side day or night. Be sure to leave plenty of slack in the wires near the reflector to allow removal of the covers for front end maintenance. Use a zip tie to secure the extra wire and prevent chaffing. |
| Exellent for the hot summer,you can painting with bike color with graphic inside!!... |
| The King of the spark plug,work perfect for more miles!... |
| Great accessories for the back of the bike,to make it easier to see the brake lights,eny car far away! |
| "Wish you would have put them on sooner". When your co-rider is happy, you are happy. |
| What a difference on a long ride. I'm 6'2'' and adjusted the backrest to the rear most position. I have plenty of leg room with no complaints from the passanger. Very sturdy construction, nice match to the factory seat material. |
| The chrome on my first set started pitting within the first six months. No worries, Kuryakyn sent me another set of arms at NO charge with NO hastle. Soon after that the stud that allows the arm to swing pulled out of the arm. Be careful when setting the tension. Lucky for me a friend had an extra. I have no idea how comfortable they are for obvious reasons. Wife won't let me ride on the back... |
| Installed this with the tail light reconfiguration harness. Easy to install and looks great. Anything to be more visable on the road. |
| Easy to install, suggest adding the spoiler brake light reconfiguration harness at the same time. Saves time because they connect into the bikes harness in the same place. |
| If its chrome and looks good, I'll buy it. Functional or not... |
| These are very bright little lights that will definitely light up the road. The beam is not concentrated so you can not aim them very well. You may also want to turn them off to oncoming traffic. I had a lot of high beam flashes from other drivers. The mounting brackets fit well but could be a bit thicker to prevent the lights from vibrating. The supplied plastic push pins used to mount the brackets to the bike were very brittle. It took very little pressure to break them while pushing the pin into the housing. I contacted the manufacturer and they quickly shipped me their solution. Since the lights are mounted inverted don |