Contact Us
| ONE YEAR ON AND HOLDING UP FINE.SEEMS TO BE REAL GOOD CHROME. A MUST FOR RACK BAG FOR MORE LUGGAGE SPACE. WOULD NOT BE WITHOUT THE KURYAKYN LUGGAGE RACK. |
| A MUST FOR PASSENGERS CONFORT. A GREAT ADDITION. WOULD HAVE THEM EVEN IF I DIDN'T HAVE A PASSENGER ONCE IN A WHILE. THEY LOOK GREAT ON THE BIKE. HAVE THEM 8 MONTHS AND THEY STILL LOOK LIKE NEW. |
|
I have this one. It works just fine, but...... Where the mast is pinned into the cylinder, it's loose, and flops all over the place. I'm replacing it with another brand. |
| The instructions for this install a detailed and easy. The hardest part of the install is running the wiring down behind the trunk to the connector behind the lower center panel between the saddle bags. I found that one side of the brake light portion didn't work properly until I started the bike. Since then everything works great with engine on or off. Very nice addition and effective for safety. |
| After studying the instructions and installing the left side first, it was easy to go on to fit the right hand side. I have an arthritic right knee which gets stiff and sore after a few hours riding. I rode about 300 kilometers to test the pegs out and found them to be very comfortable for resting one leg at a time, but two legs at once press against the fairing a little. This is acceptable, as it is a wide fairing, and not the fault of the pegs. They also look fantastic. |
| Had no trouble fitting this product and it was easy to just plug into the existing wiring harness. Most Australian GL1800's only have the saddlebag lights working to conform with Australian Design Rules. My Wing has had a different wiring loom installed to allow the trunk lights to work as well as the spoiler LED's. Although the only colour matched plug was the 3 pin red one it was easy to find which of the other plugs matched and so all the lights work perfectly. We use a flat 7 pin plug wired for 5 wires. Turn, stop and running lights. The aux. and electric brakes are not used |
| This cover fits my GL1800 perfectly. The only improvement I would like to see is reinforcing patches to stop the radio and CB aerials from chafing through. I overcome this by placing a rag over the bent over aerial base. I am very pleased with the quality. |
|
My previous review still stands with respect to matching the color with the 2007 blue but, now that I have had them painted, you can't tell that they are not part of the fairing. I believe that the color they come in matches the 2005 model blue. Now they don't look like an add on. |
| Now that I have them painted to match the bike, they look great. You can't even tell that they are not part of the fairing. If you plan on adding the Kuryakyn grips with the helmet locks on the ends, the helmet will hit these when hung from the locks. |
| Nice grips. Allows an easier throttle response now that you have a larger diameter to turn. Heat transfers pretty well. Was not sure if it would, but it does. Start bike and leave on high for few minutes before you head out. "Hold the heat in" once you ride. |
| Great Looks...However, the install was much more than I bargained for. The brake calipers have to come off, the brake mounting bolts replaced. Over all...A lot of work for such a simple item. Looks are worth it in the end. |
| Just installed, looks great and were easy to install, very good directions and easy to understand, a very nice compliment to our Goldwing, also a nice chrome look, very happy with them, my wife loves them. Mike |