Contact Us
| It's the dead of winter here and so I haven't had the oportunity to fire it up and ride. Will see about its function once spring arrives. Lots of "up close and personal" time with the bike in order to fit this but then again, that's not all bad either. What I have a question about is the filters fit. Seems it was about 1/16" too large front to back. Made for an impossible seat until you remove the OEM rubber seals as per instructions, and even then fitment was difficult at best. Had to very carefully fit this into the gap around the perimeter of the air box being careful not to press down enough to actually seat it. This would have caused bulging puckers which I was concerned would be an issue once the top was placed. Think I got everything together ok, may never know. Has anyone else found this to be a just slightly off sized piece? |
| Works well in saddlebags for organize the small stuff. Highly recommended! |
| No problem installing mine. It fit easy and comes on and off easy for tire changing. I would and I'm sure I will buy it again. |
| Had mine on for 4 years now, I'm about to put a new one on.. Great fit, looks good and help with bug clean up. Great Price.. |
|
I was attracted to the tasteful styling of this accessory. It really adds some sparkle to the front cowl area of the bike. If you are interested, you can check my gallery to see how it looks on my titanium wing. During the installation process, watch out for metal shavings from the machining on the new chrome inspection cap that screws on in place of your old inspection cap. I had to run a rag around the threads and the inside area where the O-ring goes to clean out the pieces of metal. I can't find a 12 point 17mm socket so I used an 11/16 one. The 11/16 12 point socket it wasn't a completely snug fit, but it was able to cinch up the new cap without spinning. Might be better if you got a red garage rag and let it go between the socket and the cap. it would protect the chrome head on the cap from the socket's teeth while taking up the slack due to the difference in size. Be sure you follow the instructions about greasing the threads of the new cap before installing it. Also, make sure the o-ring is there as well. After installation. Start and run your engine until the cooling fans start up. Give the cover one more good press-on then shut it off and let it sit 12 hours before taking it for a ride. Looking good! |
| GREAT hitch. Bushtec quality shines through again. I installed it myself. very good instructions came with it. Took me about 3.0 hours to complete. The supplied wiring harnesses are plug and play, and added bonus in my opinion. |
| Another great product from Kuryakyn. These along with the other Bear Claw chrome accessories really set your Wing apart from the masses. |
| I was so looking forward to adding this accessory to my Wing, but ran into trouble with the packaging. The shrink-wrap is difficult to remove, and if not REALLY careful, you run the risk of breaking off the small plastic tabs. They seemed brittle to me, but perhaps it was just my haste to get them out of the package that resulted in the damage that I encountered. Result, un-useable! |
| I installed these along with the fairing lighted trim # BB52559. The combination together looks fantastic. I have accent lights mounted inside the housing and with these it makes the accent lighting stand out more. |
| Have had these on the bike 8 years. They certainly hold up well to the weather. However, they are starting to pit. A good coat of chrome cleaner on them every now and then keeps them shiny, but once the pitting starts, you could do much about it. Also has held up well when the bike fell on its side a few years back. Without this installed, probably would have had more damage to the bike. |
| Love it. Installed simply and easily in less than one hour. The bottom on the "J" attachment arm is level with the stock muffler, so dragging the ground will be highly unlikely. I purchase this with Rivco's large cooler rack it is a great combo. The cooler rack has 15 inches of ground clearance, and you can't tell its back there. |
| awsome product I had a little trouble at first did not recieve signal called wingstuff and was very supportive ,come to find out it was not defective at all .If anyone has any problems like mine check the big plug in and make sure you dont have any broken wires like I did .thanks again wingstuff |