

| Bought the lowers in purple. Didn't have the hand wings in purple. Boo. So I made my own out of black 1/4 plastic material. Why should I buy black ones that do not match my uppers when I can make my own uppers for alot less. Again Boo. |
| Easy to install work well. Thought I would have a problem working around the mirrors but I was worrying about nothing. You will like the way it looks on your wing. Bling, bling! |
| Bought them like them alot. Easy for me to install even though I had to drill holes, templates worked well. Take your time installing them and you should not have a problem. |
| Bought 2 one for myself and one for wife. Two things I have found helpful if I misalign the release I have found that if I press on both release tabs and push the two halves together I hear a click and then just pull while still holding the release tabs in and it should pull apart. Another help is if when latching I put a thumb and forefinger on each side of the female base I can feel if one of the pins are misaligned and trying to slip through on the outside. |
| Installation took about 30 minutes. Very well made (for the cost it should be). It is a 30mm required hole. Drilled it with a 1&1/4 inch hole saw, then gently cut out the extra 2mm with a step drill until it fit perfectly. |
| All I can say is BLING, BLING! These look great on the bike and really give the engine a make over. I have received many compliments on them since added. Very easy install, nothing to take off they just go over the original covers... |
| I went with these lights because they match the headlights beam color, I hate it when lights are different in color than original lights. With that said they look great on the bike and for me added a little more piece of mind that you will be seen. Really do make a difference while in cornering and in fog riding, you can see the road better! They also really light up the front end nicely, installation was a little bit longer than I would have liked, but got through it, make sure that you adjust them before replacing the lower cowl, but other than that a great add on. |
| I really like the added bling it gives the front end of my 08, even more so after I painted all my lower cowlings the same color as my bike, really pops! A must, my riding buddy could not wait to get his in after seeing mine.... |
| I feel these are a must for looks and to also be able to get under the rack better for cleaning. Also even though I did not have this problem like a friend did, they will cover the holes you have to put in the trunk better if you dont get the hole right the first time. Take your time on the install and you will be happy with the final product! |
| This rack looks and goes very well on the Wing! Not hard to install at all, would suggest getting the risers as they helped raise the rack just a little for me to get the trunk clean after washing and also added a nicer look to where the rack is mounted to trunk. Deluxe rack bag fits great. A must for any Wing!!! |
| Bought this bag for more storage for on those longer trips and it works great, has plenty of storage for those items that you always seem to need to get to. Rain cover also works great and you can't loose it because it is attached and when not in use folds back up into front compartment on the bag. The two front side pockets also come in handy for my wife to put her "when I take my helmet off" products!! Worth the money |
| I bought these for my wife and she loves them, not hard at all to install and look great on the bike. My only problem was that after tranfering the spring and ball bearing they did not want to stay in place when in the closed position,they would fall in cornering so I took out the original spring and replaced with a slightly longer one and now they stay just fine. My wife again loves that she can put her feet up on longer trips. Once again guys if the wife is happy you are happy. Ride safe! |