Contact Us
| I had to replace the fork seals on my 01, so I thought why not change the bearings while I had the front off. It was a little difficult getting the old one out, but finally with a little help from the trusty Dremel, I got them out. I had a local dealer press the ones onto the stem just to be safe. I made my own tool for the steering nut out of galvanized pipe, again cutting out the indentions with the Dremel. At the same time I had the deal install the progressive springs because I had them on a previous Wing I had owned and loved them. Even with 10,000 miles on the Bridgestones, I could tell an immediate difference in the low speed handling. I would never have taken my hands off of the handlebars before, but I just had to try it once and the bike ran true and straight. I am ready for a new stone on front and can't wait to see how many miles I get out of it. My advice is, if you've got to take the front-end off for any reason, go ahead and install these then. I asked my dealer why didn't Honda admit there was a problem and install these bearings on the new ones. He said they would have to do a recall on all of the older bikes and it would cost too much. |
| Easy install and work well especially in the summer to bring more air across your body. Stick on rubber bumpers missing but found the same thing at Home Depot. Would be five stars if the bumpers were there |
| Bought 2 sets of AVON COBRA the front was great no copping up to 15000 miles , the rear blow out after only 8000 miles and I was ridind whit my trailer and wife never again, I put a new dunlop D250 on the road and at full price and I love it . Now I got a brand new rear AVON COBRA for sale |
| looks great and holds the rack bag perfectly for weekend trips. |
|
If you have the Traxxion GL1800 fork brace then you need this fork guard. It fits perfectly with the Traxxion brace (can only be used with the Traxxion fork brace) and looks really good. It helps protect your fork tubes from dirt, bugs, etc. Much heavier duty than the plastic Honda fork guard that you lose when installing the fork brace. It IS a bit expensive but is a quality piece of protective gear that looks good. |
| I have a 2008 Gold Wing - this is the first time I did the fork service myself so I wasn't sure what I needed and what I didn't need. This kit from WingStuff had all the parts I needed with nothing missing and nothing extra. This kit is just right. I'd gladly recommend it to anyone. |
| Absolutely beautiful pieces, I love the way they look. Finishes off the chrome look nicely and very easy to install. One thing that I did do was run the bike for 5 minutes to warm up the stock valve covers to allow the adhesive to stick better, it was pretty cold in the garage. |
| GREAT PRODUCT!!! Well worth the money. I had these installed along with the Kuryakyn Gen II fork brace, and what a difference! Smooth ride and tight feel in the twisties. My Honda dealer was so impressed, he's going to stock these balancers for other customers. Thanks, Centramatic!! |
|
I bought this item to complete my Goldwing 2005 chrome accents. The first thing when I opened the item was to overlay it on the dash to see the fit. As expected, it was not a good fit. I read the provided instructions carefully. As instructed, I manually formed the dash accent to fit as best as possible to the dash. That meant that manually you have to bend the accent in a way to get the best fit. Once I felt that the accent was formed top conform to the profile of the dash, I cleaned the dash with rubbing alcohol, removed the tape backing from the accent and placed it on the dash (I noticed that the tape was kind of thin) I put pressure for about 5 minutes throughout the accent. After 1 week of used, it started to lift up by the right corner and in the middle. I was disappointed. I try to remove it from the dashboard. In certain areas it was really adhered to the surface. After carefully putting pressure/force to pull it from the dash,the accent broke in two areas. Being technically oriented, this item should have been assembled with thicker and stronger adhesive tape. Having to remove it from its location once is installed, your chances of this part braking is increased tremendously. The accent is already stressed by the forming process, specially in the thinner sections, to make it fit properly to your dash that when needing to remove in a case like mine the part will brake on you. Highly dissapointed with this item!!! |
|
These lights are EXTRA bright, both day and night - even throw off a nice glow on the road at night. I installed these at the same time as I added the fairing/stealth light and the mirror LED turn signal combo. As others have done, I used the required seperate adapter for the turn/stealth lights and piggy-backed off of it with a connection to spare, so everything was plug and play on my 08'. The hardest part was fishing the wires up to the turn-signal harness, but even that only took about 10 minutes since I already had the side compartments out to run the other light's wiring. Can't go wrong with these! |
| Look great, but one of mine faded so am now replacing the set. |
| Great! I was going to contact Kuryakyn to see if I could get a replacement. Actually they stayed on for 3 years before I lost one, so not too bad. Thanks for having these in stock! |