Contact Us
| I attempted to load music without using this program. While you can get some music to play, you can not experience the full potential of the MP3 player. This program is easy to use, and makes transferring music to your media (USB flash drives & SD cards) easy. I highly recommend this program. Load and enjoy. |
| just changed the air filter what a job easy if you have the time. filter seems to be doing its job |
| Paper Instructions Poor, but after you watch tape, pretty simple to install, just put on the trunk and it does look good, if the saddle bags wern"t so pricy I would install them also but for now just on the trunk and it makes the bike look good. |
| Very nice visibility adder & turn indicator, plus bling for the wing! Ride safe! |
| Nice bling for the wing! Gives that area a classic finish. Use masking or painters tape to mark alignment, then install. |
| I would say an easy install, but I managed to make it complicated, somehow. My 2010 has the sidestand safety sensor ( stand down kills engine if into 1st gear and lights up dash indicator that stand is down too) and there is a 'nib' on the sensor that fits into a small hole on the stand- it would not align when tightening the bolt, and I eventually sheared it off- UGH! Thought I was toast, but went ahead reassembled & much to my surprise, the system worked as usual??? Go figure? A new switch costs ~ $45. ANd I echo what CHarles S said- make sure the spring ends are correctly postioned. |
| Nice quality, easy install! |
| Easy peasy, lemon squeezy. I agree w/ those who say this should come stock from Honda, epsecially for the price we pay!!!I highly recommend using a stpeed hole drill w/ the largest hole dia step being 1.25" minimum. Makes the job quick & easy- now I can charge my phone on trips! |
| Very simple install! Very nice feel & reduces srtess in hands. The key to getting the covers to mate easily is spray an ammonia free window/ glass cleaner on OEM grips, then slide the rubber WITH the front cover already assembled, ie w/ the rubber nubs properly postioned. Assemble rear cover, making sure to postion the rubber nubs by pushing inward & up to get the edges into the cover slots. This allows the cover halves to almost engage the tabs w/ nothing more than hand force. To ensure the tabs are engaged, ie no gaps exist between the cove halves, use a C clamp (one should do) w/ rubber feet, like those for woodworking or other (Home Depot or Lowes, etc), and these will make that final "click" for the completion of assy. Take care not to pinch the cables for heated grips |
| Extremely easy install! adds that perfect contrast to the otherwise blackness of the dash area w/o creating a surface for sun reflected into your face ;-) |
| Looks fair but doesn't fit properly. Both sides stick out away from the fender about 1/16 inch. It is stuck to the fender only in the middle, I am waiting to see if it comes off. |
| Looks good when installed but as usual with Kuryakyn the instructions are poor. Forget about using he wiring connectors, they don't work, just strip the wires and solder them. |