Contact Us
|
Firstly, no fault with the product or the WingStuff service. All ignorance on my part and the result of trial and error. I’m in Australia and have a 2010 GL1800. I love the flexibility of RAM mounts so I added RAM mounts and RAM cup holders(rider & pillion) to my GL1800. I can interchange my GPS, Phone and cup holder RAM mounts between Goldwing and truck as required. I liked the look of the Beverage Butler, and, after reading the reviews, decided to invest in 2, seeing as I was ordering other bits & pieces from WingStuff anyway and the cost was negligible. One thing I didn’t know, and didn’t investigate, was what the hell a 34oz cup looked like. We use metric in Australia so I expected a large thermos style mug, like you buy in the shops here, that would fit the RAM cup holder, or just about any vehicle mug holder, which is standard. But the Beverage Butler is enormous and far too wide to fit into the RAM cup holder. So be warned….don’t make the same mistake I made. I’ll find a use of the Beverage Butler and I still think, for what I paid for the pair of them, they are great value for money so I am not complaining. Good Luck & I hope this review helps someone. |
| The trim looks good easy to install,a little over priced. |
|
I purchase the cover for those trips where dragging along a full cover would be quite impractical. This cover exceeded my expectation for proper fit, overall space it requires when packed and looks! I have the Cranberry cover on a 2008 Pearl White 1800 (and it looks real good!) If you are trying to keep 'everything' (i.e. hard rain, dust storms, etc.) from getting on your bike, then you might want to think before you purchase this cover. It was never designed to do that! It is a quick, good looking cover that will keep the dew, light rain and general stuff that falls from the sky off the seat and instrument and control group. Just realize that it does what it was designed for, it is not a mobile garage! |
|
I received this as a gift. It DID NOT come with any instructions or template. Since this is a Honda product, Wing Stuff wanted me to return the rack so they could ship me another one with instructions..???...didn't make much sense. Go to: https://www.justwings.com/uploads/TRUNK_RACK.pdf to get the official Honda instructions and template. I installed the rack with the added smooth rubber washers added and it looks great. Quality product. Looks great. Would give 5 stars except for the lack of instructions & weight limit od 2 lbs. |
| Installed on one side and could not see any difference from the view in the main mirror. Returned. |
|
I liked the liner well enough. It was a nice way to organize things. However, it steals about 2-3" of space at the top of your trunk. This doesn't sound like a lot until you realize that you CANNOT put even once full-face helmet in the trunk with this thing. I know, there are the helmet hooks in the back and etc etc etc, but I like being able to put both of our helmets inside when we are on a quick day trip. I ended up taking this off. If losing this space and helmet capacity from your trunk is no big deal to you, then I recommend this. Otherwise, organize some other way. |
| This is a good idea, I am ordering my second one. First one is starting to crack after 4 years. |
| I used this item while traveling through Baker, CA, Las Vegas, NV, Mesquite, NV, and St George, UT which are some of the hottest places on the face of the earth in August. It absorbed water quickly and did a great job of keeping my neck cool. It worked so well that it made the temperature seem much cooler, like 95 instead of 115. If you're an idiot, like my friends and I, and plan a long trip through the Mohave Desert in August, you need one of these. Take a 2 gallon baggie, place the neck tie and your cooling vest in it and fill it with enough water to soak everything. When the vest and tie dry out, just stick them in the baggie for a few minutes to absorb more water and you're all set to go again. I really like this neck tie and my opinion is that it works better than the skinny ones with the beads. |
| This bag is well constructed and can pack a lot of stuff, but after loading it up, I was concerned about the excess weight on my trunk. I packed it full and took it on a trial/maiden voyage to see how it would perform. After a few hours of riding, I noticed a few scuffs on the clear coat where the edge of the bag and/or the straps had rubbed. There may be a way to prevent the rubbing and scuffing, but I would still be concerned about the weight issue. I decided not to use this bag on the trunk rack and may use it on the rear seat instead, or I will only use it for very light packing. |
|
This is a very good product. Ships in several pieces but everything fits as its supposed to and install is no problem with the possible exception of the lower, forward, right hand bolt connection...not a lot of room...but its doable. Once installed its strong and secure. I weigh 220 and i can stand on it. I use it to carry a Rivco 18 x 30 rack (love it) which we always seem to overload (at abt 50lbs) but the hitch seems to handle it fine. |
| Installed this in anticipation of a trip to Alaska, good fit, easy install quality product. Have run this about 10000 miles now....no issues at all....easy oil change. |
| I ordered this headset back in May and waiting for several months of use before writing my review. I have no issues at all with this headset. It works great. As a matter of fact I am ordering another one today to replace the headset in my wife's helment. |