Contact Us
|
Great product and I love the fact it's waterproof! Install was a breeze! |
| This is the second Dunlop tire that broke a belt inside the tire on a sharp lean turn at slow speed. the result is the front of the bike wobbles and then the tire wears to the belts with in 100 miles. If you are not aware of this please BE AWARE!!! this results in lost of control and for me a crash in the middle of Texas and today the second Dunlop that I learned this from is on the back of my bike... thinking it is a well know problem with the goldwing -I rode the bike home some 200 miles fighting the handle bars - I totally rebuilt the front end of the Wing and it still wobbled - Then I found it -This REAR Tire was TRASHED rubber off in three places cords showing. -Ready to fly apart. |
| An exact fit. Easy install and look great. |
| This filter is just slightly smaller (height) than the Honda & Fram oil filters, which allows for much easier application. I mean I do not drop the lower cowl when I change my oil, and getting this HiFlo filter in was 100% easier. Unless these ever go out of stock, I have found my permanent oil filter . . .! |
|
The absolute bottom line about this product is this... WORTH EVERY SINGLE PENNY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| Worked great on my 97 GL1500. |
| This is a great little tool to have. |
|
'06 Wing has 4 lights. 2 on each side. I rigged Back Off so that 2 inner lights wig wag with 2 out lights on. Then all 4 flash. The bag lights stay solid. I then put a micro switch in trunk to change pattern. Thinking about putting a spoiler with light on but don't know how it lights or if I want it. Wing has 6 tail / brake lamps as is. |
|
No issues fitting it. Coins in the spring worked perfectly. Makes very little difference to ground clearance on left but a bit on the right. Takes some getting used to for a smaller, shorter bloke. Hardest bit is "feeling" if the bike is upright enough to have both stand feet on the ground before commencing reverse. Notice also that it loads the reverse gearbox. Often a distinctive "Clunk" when you disengage reverse after having parked the bike. Also, be VERY careful of where you park. Make sure the surface is flat. One park the rear wheel rode up against a "fold" in the tarmac and when I returned to the bike as soon as I mounted it the stand retracted. Even though it was in gear there was enough backlash to allow the "fold" to roll the rear wheel forward a touch. Within a breath of tipping over. But the stand works and wife loves it. |
|
My Wing is a '06 with comfort package and I'm an Iron Butt member. I use my Air Hawk on trips over 150 miles. Very little air pressure need should be use in the Air Hawk. It should seem almost flat to tough. The pros: Very comfortable on long trips and easy to install. Cons: Being an air bladder, it is affected by temperature and altitude changes. So in a day one may need to adjust the air pressure at each fuel stop. Also a heated seat doesn't work very well when using the Air Hawk. I have a Kuryakyn back rest and attach the rear tabs to the mount with small bungee cord and the front with the supplied strap looped around the tongue of the seat. |
|
This thing really works. When I received the kit I made a repair just to test the item. Just make sure that when you are inserting the plug to screw the allen wrench in until it stops and want go any further. A few weeks after the test run I found a nail in the center of my rear tire, "which sucks". Current tread was about 40% remaining. The plug went right in and stayed with no leaks. I want tell you how far I rode on the plug for fear of being beating with a large stick, but is was some distance. When the shop removed the tire we found the plug was flat against the inside of the tire, just like a professional boot,less the glue. Additionally, there was NO air lost. Make sure that you do a test run when you first get it. Really, it's a piece of cake to use after that. |
|
Just what I needed more light.lol Like chrome you can't have to much, especially if you happen to ride a Black wing. The installation was easy, However, I had to contact the the company, Electrical Connection. Seems as though the wiring diagram information supplied didn't match my bike. Not to worry through, they came to my aid and we had the problem solved in about 5 minutes. Very nice product, quality and people to deal with. |