

| I mounted my spot mirror on the top. It gives you the option to mount on top or bottom. There easy to install nad the hold on great. I like the added view but like the othere reviews I still turn my head but these do help and not too expensive. |
| I purchased 8 of red and yellow. I installed them on the frame on my pull behind trailer and on the tong. Just drill your 1/4 inch hole and Wing nuts to install. Look nice |
| I purchased the Gaskets prior to installing the covers. It turned out the old ones didn't tair the gasket but replaced them anyway. These are easy to insall but still recommeend you replace the gaskets they do not come with the covers. Very nice addition to polished valve covers. |
| Nice Easy to install and fits perfectlly Love the look |
| These add a nice touch to the bike but they are a mean mother-in-law to get on. If you look in the picture you will see that the side next to the tank doesn't sit flush and it is true. But they look great and its hard to notice its not perfectly flush. |
|
THIS IS A GREAT ADD ON PIECE,HOWEVER THE INSTRUCTIONS LEAVE OUT A FEW THINGS.REMOVE THE TAILLIGHT TO GET TO THE MOUNTING BRACKET ON THE BIKE.REMOVE AND SAVE THE LOWER BRACKET OTHER THAN THAT,PRETTY STRAIGHT FORWARD.. DREMMEL OF A SMALL PIECE OF REAR FENDER,AND REINSTALL FENDER. |
| Took about i min. Used a little silicone for insurance. added to a 2012 Wing. |
| This is a nice piece for the front end. This is my second front fender tip. The first one was torn of after someone left a 2x4 in the middle of the road right after sharp curve. I was able to stand the bike straight up, hit the 2x4 and it came across the fender and tore the tip off. No damage to the fender but lost the tip. |
| I installed in about 45 min. There were no rear speakers installed and never were there. I purchased new but don't know why no speakers. So I installed new ones at the same time as replaceing the covers. You have to pull the side pockets to axcess the screws at lease I did so I would also install the wire harness to the speakers. Lookds Great |
| This is a very nicelly made. It fit my trailer perfectlly . I would have put some measurements of my trailer but it is out being painted to match my bike. It is aproximentlly 40 inches wide. 48 Inches long and 18 inchies High. That is the box only. Add another 6 to 8 inches on the side for the wheels and the thing fit like a glove. For me it was perfect. I just guessed on the thing and it fit. Not the way I like to buy but since they had no measurements posted I figured if it didn't fit just send it back Right |
| East to install and they are nice. A little bit pricy but worth every penny. Considdering we need all the visability we can get. I installed them and to me they fit perfectlly. Recommended over stock anyday. |
| Two screws and easy install. Looks great fit perfectlly Good price well made. |