Contact Us
| I got this vent last week to put in my new windshield. This vent makes a big difference in the windshield. Good fresh air while riding. |
| I got this along with a new VStream windshield. It fits but because the VStream is a little more curved in the center a stock shield so it takes some pressure to get the edges together to insert the bolts. Be careful not to scratch the windshield while trying to force the pieces on the vent together to bolt in. |
| I just installed it on my 09 GL1800. Everything went together ok, not smooth. Had to "bend" the edges down to align the brackets on the edge. Once all the brackets and screws were back in it was very hard to slide up and down (this was before I put the front back together) so I figured I had put something together wrong although I couldn't see how, things only go together one way. After loosening the screws and brackets and checking they were not catching someplace I tightened them back down and still very difficult to adjust. After spending an hour trying to figure out why I saw it. Because it angles back further than the stock shield it drags on the dash. I haven't ridden with it yet so we will see but I'm not sure I like it rubbing the dash. |
| I just got these as a present and put it on immediately. Looks Awesome! A bit tricky to install as the adhesive end goes up under the other body part. Dry fit it all first including the screws. One of the new screws they supplied did not go in so I had to use the old screw. Dry run first to make sure you can get it situated. |
| I just got these and put them on immediately. Easy to do and what a difference it makes. Looks Awesome! Currently chroming the entire side so bring on the bling on the wing |
| I just got this as a present and put it on immediately. Looks Awesome! Not the most visible "bling on the wing" but definitely a must do to finish your bike. |
| Fits fine, no issues. |
| Quality seems good, easy installation. Pretty basic piece. |
| These really are functional and look great. I had to play with the right position on them to keep from hitting my legs. Easy install, passenger will love them. |
| The Brakcetron kit comes with two different length allen screws and spacers that fit inside the screw area very precisely. No wobble. No movement. Very solid mount for your Garmin or heated grips controller. |
| I got these in the summer. took care to clean all parts. Put them on waited for a day to ride. and it was almost like the tape melted. i took both off about half hour into the ride. was going to try putting them on with different glue. |
| I bought a couple of these, one for me and one for my brother and after some patience we both got them installed. I give it a 5 star for look and quality but marked it a 4 because the install was frustrating. There are a couple fasteners that require going through the vent louvers for access . I've put a fair amount of jewelry (that's what my wife calls it) on my bike and all in all I would recommend this one. |
