GL1800 Goldwing Midrider seat is Ultimate Seats main seat that will suit most riders. If you are happy with the riding position, which includes your reach to the handlebars, leg room and reach to the ground that your stock seat offers, the Midrider seat will work for you. Their Midrider seat will sit you in the same position, but provides a comfort level so good, you won't want to get off your bike on those long rides.
GL1800 Goldwing King seat is primarily designed for riders over 6' 3" and over 260 lbs and/or riders with long legs (more than a 34" inseam). Our King is 1 1/2" wider that the stock seat to provide more butt and under thigh comfort, but its nose is also narrowed down to allow correct inner thigh room. The King will sit you 1/2" higher and 1 1/2" further back from the handlebars and cowling. This allow for less bend in your knees and helps for your long distance ride comfort.
Honda® Goldwing GL 1800 Midrider seat is designed so you sit in the seat, not on the seat. Our Midrider seat will sit you at the distance from the handlebars as the stock seat. This seat also sits the driver at the stock position. The driver section of the seat is 1 inch wider than the OEM seat which provides more butt and thigh support.
Honda® Goldwing GL 1800 King seat is designed so you sit in the seat, not on the seat. Our King seat will sit you 1 and 1/2 inch further back from the handlebars than the stock seat. This seat also sits the driver 1/2 inch higher than the stock position. The driver section of the seat is 1 and 1/2 inch inch wider than the OEM seat which provides more butt and thigh support.
The passenger section of our GL 1800 seats have been given as much research and development as the driver's seat. The inner leg thigh area and the seat butt area have been resculptured to fit perfectly and our memory foam cushion will put them in comfort heaven.
Ultimate Removable Driver Backrest
All Ultimate Honda® GL 1800 Midrider seats have the driver backrest hardware built into them, so you can add the backrest at any time. The driver backrest quickly and easily slides in and out with a built in spring loaded plunger lock that is part of the backrest hardware permanently mounted inside the seat.
- Pad measures 7" high by 10" wide by 1.5" thick.
- Built using the same memory foam as our seats.
- Infinite tilt to match your back angle.
- Backrest folds down forward for easily mounting and dismounting your Goldwing.
- Adjustment forward and back is more than 2 inches.
- Adjusts with a thumb screw while you're riding.
- No need to remove the seat or use a wrench.
- Includes zipper storage pouch that velcros to the back of the backrest.
- Detachable storage pouch measures 9"W x 6"H and is protected by the driver backrest built in rain flap.