Contact Us
| I bought this wrench to try on my 2018 Goldwing DCT. In the description, it said that it would fit my bike. But I had to hammer it on and then there was about an inch to rotate it. That's not enough to work with and then the wrench just stripped off and I had to get a different wrench to remove it. |
| You know back in the early 80's when I purchased my 83 GL1100A the JMC headsets were the best on the market and I still have them. The quality of their product with the cords have fail badly today, I just brought some of their products from Wingstuff 2 month ago to replace bad cords and the new ones have already fail again. NO more JMC products for me, they using very poor materials in my opinion and I won't pay to ship their inferior product, trash can it's best place |
| Installing the BackOff XP Brake Light Module on my new Gold Wing. Had this on my 2018 and found it very helpful avoiding a rear end collision. I really don't want to hear the other driver say "I didn't see him!" This really helps get their attention. |
| I purchased this battery for my hubby's bike. We installed it right away and kept a maintainer on it over the winter, but it lasted 3 months after the warranty ran out. It worked fine to start the bike, but wouldn't after sitting for a few hours. Luckly, he parked it at home instead of this happening while on the road. |
| I had the generic hundred dollar cover that I bought from Wingstuff five years ago. It has worked fine, but finally became so sun baked. and lost all of it waterproofing. What I like about this cover is that it fit my year specifically. I guess I didn’t read real well, but this is a genuine Honda cover. The difference is night and day from my generic one. It fits exactly and it has a great soft insert to cover the windshield. I would recommend this 10 times over. They should make a bigger deal about it being a factory Honda cover though. I wouldn’t have hesitated so much to buy it if I had known that. |
| Lights up the trunk. Honda should install at factory. |
| Tire ordered on june 4th, 2026. Arrived quickly via drop shipment. Manufacture date on tire is 1125, so the tire is over 1 year old before it arrived to me. |
| Installed this luggage rack on a Sunday afternoon. I reviewed the video first and then used it during the install to insure I didn't skip any steps. It was the first time taking off the seat and the video for that step was quite helpful. The Plug & Play Lighting Installation Kit was easy to install after reviewing the video for that part. It is a lot of disassembly and re-assembling, but everything fit well and functioned properly. The Lightstrike App is easy to use for setting the light for a variety of patterns. It was quite a bit of fun to install the rack. I rode the bike today and the rider behind me made note of how much more visible my bike is with the new luggage rack light. It's an expensive addition to my Goldwing, but I'm very happy with this purchase. |
| The mount is solid, easy to install and looks great. The drink holder is cheap and will not hold anything bigger than a normal gas station water bottle. Very dissappinted that Kuryakyn would have such a cheap product. Had to order separate drink holder that would fit the mount. |
| The mount is solid, easy to install and looks great. The drink holder is cheap and will not hold anything bigger than a normal gas station water bottle. Very dissappinted that Kuryakyn would have such a cheap product. Had to order separate drink holder that would fit the mount. |
| These lights are a must. Ordered them for my 2012 Wing low beams when I had a stock bulb burn out. After installation, I knew I had to update my hi-beams too. Spend the money and update all of them. You will not be sorry. If you have never replaced a bulb on your Wing, a bit of advice. First, watch the Cruiseman Garage video on replacing the lights. He does one specifically for the Pathfinder LED kit. Then, replace the low beams first. These are the easier ones to do and because a lot of it is done by feel, due to the confined space, this gives some practice. Be prepared, because the hi-beams are even more confined and if you don't have small hands, find someone who does. And be prepared to just spend some time installing, and sustaining some scrapes and bruises. Not a real difficult task, it is just working in the confined space. This has nothing to do with the Pathfinder lights, it is just the way the Goldwing is designed. In the end, you will be happy you upgraded to these. |
| Very bright however the template is off a little on both sides plus the curve isn't perfect but it works im good with it |