Contact Us
| Easy mod to make it classy. |
| Heli Bar risers are definitely better than stock. Should have went with the Heli Bar handle bars. Will do that next.5123523 |
| Two major problems with these. One is that they are too short. The plastic braces that go on the rim have to be removed. The second problem is that there is not enough thread to install the FOBO locking nut and the TPMS unit. I will look for another brand of these because it is a great idea. |
| I ordered these for my '19 DCT. No instructions, you have to download them from a QR code and they're not too specific. I You Tubed videos and got better instructions however I chose to place mine above the crease in the saddle bags to make them more prominent. That's the nice thing, they look great but you have flexibility in where you mount them. |
| Takes the strain off shoulders and lower back. Reduces your reach to handlebar and gives you a more relaxed riding position. |
| I was debating installing these for a while but didn't necessarily see the value. I was wrong. They definitely provide a wider field of view, which is what I was looking for. I've had several close calls over the years with vehicles sneaking into my blind spot, and these mirrors significantly reduce that. Installation was super easy; it took me 4 minutes- yes, I timed it. |
| Just got them today and got them installed and just took the bike for a ride in the dark and what a difference. Now I am going to replace the high beams. |
| I have just installed these magnetic drain plugs and will drain the oil at 4,500 miles. I expect to see little to no particles in the second oil change. If some is found, I will have an oil analysis done as warranty proof of failure. Just a FYI, the 1833 cc is an ALL aluminum case. Over-torquing can and will crack a case or strip threads. |
| I really like how these brake lights look on my 2025 Honda goldwing touring. They are very visible and bright. My trunk looked bare and needed some additional brake and turn signals for safety sake. Installation including the fuse block was a little more labor intensive than I expected. My biggest concern is the 3m tape. TN has some high humidity and temperatures as well as some cool temps so I'm not confident how well it will stick. Lights on my other bike were bolted on so time will tell how well they hold. Otherwise I am very pleased. |
| These mirrors show blind spots (a life saver on the freeways) as well as what’s behind me. Their image quality is as good as stock. They snap into place to put them on and hard to distinguish them from the stock mirrors unless side by side. One of them fell off during my initial ride, but the good people at Panovista shipped me a new one, no questions asked. They are both working great. Highly recommend! |
| The bad news first - the BT-05 is **NOT COMPATIBLE** with the CB radio on the 2018+ Goldwing. The headset will not receive a CB signal from the bike's audio system, although you can still hear it through the bike's speakers. J&M recommends the BT-06 headset for use with CB. The good news - if your Goldwing has no CB, the headset worked flawlessly. Caveat Emptor, y'all... |
| I purchased this to go on my 2025 Goldwing tour DCT. I ran into trouble with the install and wingstuff directed me to Ciro's tech support. The very helpful guy at Ciro told me some new goldwings have tabs on the back part of the bracket where this mounts on, and I needed to file them down. Once I did that, it went right on. 100% fit? Not really. |
