Contact Us
| Best way to store and find small items without digging through everything on you bike. Great fit and finish and customer service that is ***** when you have questions or need a problem solved. |
| Looks stunning on the bike and easy to install took me about 45 minutes to a hour |
| Need to contact wingstuff or the manufacturer that made these floorboards. Installed them which was a breeze but the right floor is very loose, wondering if I could get a replacement due to I've only had them about wks. |
| Package arrived a little damaged, but contents were fine. Directions were good. The template was right on. I placed the template then marked the plastic a little. I placed painters tape along side the trim pieces where I just marked them and drew a line on the tape where my mark was. Then I removed the trim piece to inspect the alignment of the screw and the mark I made on the painters tape. Looked good and I did not have to make any adjustments. I then drilled the hole with a step drill. This gave me a very clean hole. Heh heh. I then removed the screws, reinstalled the trim and put a little silicone around the spacers to keep water out. Gave 4 stars because one of the brackets needed the paint touched up. The wings work well. I would recommend. |
| Package arrived with some damage but the contents were undamaged. Parts list indicated 2 large white plastic bushings for each mounting stem but there was only 1. Called Bakers. They told me they made a change and I only need 1. Fair enough. But I went to the hardware store and picked up 2 more. Install went fine but be aware that the original screws are locktited in. Be sure to stay straight on the screw. The wings do a nice job of directing air. I would recommend. |
| Looks nice and stays on. The only bad side is that you have to first put a foam piece around the base of the trailer ball to secure the cap. I'm sure the first time I need to use the hitch the foam piece will have to be removed and will wind up with grease everywhere which is what I bought the cover for to prevent in the first place. It seems like it would be a better design to have the foam piece secured in the top of the cover to capture any grease inside the cap. |
| Good fit. Seems to be heavy duty enough. I've only used it once so far and the bike still got a little wet but not nearly as much as previous covers. Overall a good deal for the price. |
| Super easy to install. I can't believe Honda didn't have this as standard equipment. |
| Purchased from another on line retailer Aug 2020. Installed between Halloween and Thanksgiving and has around 4000-5000 miles on it now.... The tread as developed several cracks where it meets the sidewall that is allowing air to escape.... Had I been on a long trip I'm betting it would have separated from the sidewall completely. Drip grip is great.... Wet grip was very sketchy. 2/10 would recommend. |
| Just because Shark Helmets is not a household name in helmets don’t overlook them. If you like a modular helmets ya gotta check this one out. I love the design when open it basically looks and feels like a 3/4 open face helmet, then with the flick of the lid it’s a full face helmet. This is my 2nd Shark and they make a really nice unit. |
| Perfect filter change kit,,, easy Peary,,, has everything you need to change the oil filters on your DCT… |
| The perfect first time oil filter kit since you get the filter wrench… |
