Contact Us
| Well worth the money. Fits into the limited space we have to work with. |
| You have to order the side lighting in order to get these adapters. Hope they get this fixed for the rest of you. |
| Look good and priced right. |
|
Fabulous. It is solid and good looking. And the ability to remove the hitch when not in use is a nice touch. Install is challenging but not difficult. Be patient and careful. As others have noted, the included instructions are basically worthless. Dropping the muffler's is easy and helps some but you can install without doing so. But what the instructions don;t point out, is removing the rear crash guard is imperative. I got CWOLAW's instructions too late to help. I received them just a few minutes after completing the install. They would have been very useful. Highly recommended! |
| Functionally they are good, and add a degree of comfort when compared to the stock pegs. The look good as well. However, the design leaves something to be desired. The set screw that fixes the "Wing Board" in place is underdesigned and slips after minor use. You can't put enough torque on it to adequately secure the wing board with a standard hex wrench without breaking the wrench. If you put foot pressure on the edges, they will come loose. |
|
Very flashy little inserts. These have a nicer fit and finish than the Kuryakyn part. |
| Does not work at all!!!! I have an 08 the gas cap will not stay shut when it mounted. To thick of a base and velcro straps poor design |
|
THESE ARE GREAT!!!!! Very simple to install.. just take note, they DO DECREASE your turning ground clearance, If you could drag your stock pegs making a corner!! watch out, these drag much sooner!! |
|
A nice product, helps with cleaning under the rack. CAUTION!!! if you already have a rack mounted, the holes are not in line, if mounted with a spoiler watch out for interference from spoiler. A Dremel, and some careful thought can fix all of this. But be sure you dont RUIn an expensive trunk lid. Took me a bit, but mine fit just fine with the proper mods. |
| Just replaced my OEM front lower cowl (Boring gray color) with this one. I already had the crome timing chain cover and driving lights, so adding this just put the finishing touch to it. It really dresses up the front of the bike. |
| Great Item! There is little space around the filter and this tool fits. Have not had a problem with leaks with 3/4 to 1 turn after the gasket contacts the mating surface. |
|
Overall a good product that looks very good on the bike, however some quality issues. 1. On some areas of the rack, you can see what appears to be "grind" marks through the chrome. 2. The threads on the rear legs were not clean & it took some time to carefully clean them up. I would purchase this product again. I recommend getting the "Star" washers for the outside of the trunk. Also go to the hardware store & get some similar size washers for the inside of the trunk. This will provide excellent support & alleviate any fear of the trunk lid cracking. |