Contact Us
| Great addition. A must if you have fog lights. Easy installation and perfect fit. |
| The CB works great and installed without a problem. Took a little time to remove the plastic. BUY HONDA PUSH PINS if you are installing this yourself! |
|
I ordered it on Tue and got it on Fri. It just so happened that I was swapping out my rear wheel/tire (I keep a spare new tire mounted on a spare rim) so when UPS dropped off my hitch.. I had the rear wheel off. This made it alot easier. You MUST use "CWOLAW's" instructions and if you follow them, it's a snap. The only 2 problems I had were getting the "V" bracket to line up with the support tab holes. I just closed the "V" a bit and it worked fine. Then I was trying to get the last bolt into the "H" bracket and no matter how much I pried and cursed and yelled.. it wouldn't line up. I took 1 bolt and tapered the end of the bolt, then I re-cut the threads (NC 16) on the taper so that I would be able to let the bolt help me pull everything into line. After re-working the 4th bolt, I was able to get it installed and snugged down. The whole process took me about 2 hours. The advantage I have is that I have a motorcycle lift. I was impressed with the fit and finish on this hitch and I'm not sure that spending the extra $$ on a more expensive one would be worth it. I bought the hitch to use with the 11x 16 Cargo tray. |
| I have a 2005 wing and I'm installing my 5th set of ME880s. I travel 130 to/from work 5/6 days a week (mostly highway) at 75 miles an hour. After tring the Bridgestone and Dunlops (not the E3s). I'll stay with the 880s. I run 42/46 PSI front and rear and get 18K per set. They grip the road and run thru the rain with ease. At 141K on my machine, Metzelers are my choice. |
| These lights are a great show piece on any bike. I would give it 6 stars. (RED-RIDER) |
|
I am a custom motorcycle painter (www.madshadowcustompaint.com) and I have begun using RWP to protect new paint jobs to aid in assembly. For example: normally when installing a rear fender you have about 1/4 clearance. RWP protects the finish, allowing parts to be easily handled and protected from scuffs while assembling. It comes off clean and has been well received by my customers. I am able to upsell customers with this product, and expect to do more of it in the future. I also believe this will be really nice to use on my front fairing when I do a road trips this year. Roll it on, roll 1000 bug splattered miles down the road in two days, hit it with some cold water and peel it off! |
| The hitch went well. The harness was easy until I tried to wire a converter for 5 to 4 from O'reily auto. They would not work with my system,called wingstuff said go to Uhaul.Went to Uhaul bought their converter and everything works fine. |
| I installed this hitch on my 08 wing and did not have to drop mufflers.Took about an hour.It is a tight fit,but overall not a hard task. This hitch seems to be built very well. Had to grind left mid bolt was rubbing my plastic center section. I would recommend this product to anyone........... |
| Does a good job of contrasting the handle bar area. East to install and has endurance!!! |
| Easy to install, looks great. Keeps dirt from bottom of bike pretty much!!! |
| It works ok but it is hard to remove the ring on the remote so you can put the cover on. It will help protect the bike and the remote so it is worth the money. |
| Love the stand. Very easy to use. I still raise the bike manually rather than reversing the bike up on the stand. But it's so much easier than the stock center stand!! The only complaint I have it that the new stand gouges my concrete garage floor if I don't put a matt or cardboard under the bike. Otherwise would be a 5 star item. |